Hi Don!
Again… Thank you for your efforts.
PayPal inbound.
And once again….. I anyone has Bobsy SR5 /6 wheels. ( 2 piece, 4 bolt on 112
centers with Bobsy name in casting),
Please contact me.
Respectfully,
John Benton
Benton Performance Inc.
1275 North Lance Lane
Anaheim CA 92806
Work….. 714-630-5025
Cell……. 562-505-7433
On Feb 10, 2022, at 6:01 AM, fslejko@xxxxxxxxxxxx wrote:
That was me. Used the wrong name on the account. Ship to:
60 Golden Eagle Lane
Littleton CO 80127.
Thanks.
All the Best,
Frank L. Slejko
303-877-5365
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Don Anderson <donandersonracing@xxxxxxxxx>
Date: 2/9/22 11:00 PM (GMT-07:00)
To: BobsyTalk <bobsy_talk@xxxxxxxxxxxxx>
Subject: A Bobsy Talk Email: Re: Bobsy Badges
Bobsy Friends,
I received a PayPal for 1 Bobsy Badge from Tall Oaks Ventures, but I don't
know who it is and don't have a mailing address.
Please email me to donandersonracing@xxxxxxxxx with the name and address so I
can mail the badge.
Best,
Don
On Wed, Feb 9, 2022 at 6:04 PM Richard Benson <rbenson@xxxxxxxxxxxxxxxx>
wrote:
Hi Don,
I have also sent money for two badges via PayPal.
Thanks for doing this. Hope everything else is going okay.
Take care,
Dick
From: bobsy_talk-bounce@xxxxxxxxxxxxx <bobsy_talk-bounce@xxxxxxxxxxxxx> On
Behalf Of Don Anderson
Sent: Tuesday, February 08, 2022 2:09 PM
To: BobsyTalk <bobsy_talk@xxxxxxxxxxxxx>
Subject: A Bobsy Talk Email: Re: Bobsy Badges
Another Bobsy Badge Photo of the back side with mounting hardware.
On Tue, Feb 8, 2022 at 1:03 PM Don Anderson <donandersonracing@xxxxxxxxx>
wrote:
Bobsy Friends,
I finally received the first batch of 20 Bobsy Badges. There was a defective
one, so I have 19 to ship. The CNC guy is really busy and will make 20 more
when his machines are open.
Attached is a photo of one that I painted in the recessed background and
then wet sanded the letter face on a slab with 320 and 600 grit.
I'll send photos of the unpainted CNC badges separately, since Bobsy Talk
does not allow large files.
I'm asking $30 each for the badges, including all Stainless Steel Mounting
Hardware, Mounting Instructions, and USPS mailing. That is a break even
amount for me, with no profit.
Probably the easiest payment option is Paypal to dladds71@xxxxxxxxx.
Email let me know if you prefer to send a check, and I'll give you my address
I will also need your mailing address for shipping that you can email to
donandersonracing@xxxxxxxxx
I will promptly mail the badges upon getting payment and shipping address.
Don
On Thu, Oct 21, 2021 at 8:58 AM Don Anderson <donandersonracing@xxxxxxxxx>
wrote:
Bobsy Friends,
I don't have a price for the Bobsy badges yet. I'm sure the more I order,
the cheaper they'll be.
I will include the mounting hardware to make installation easy.
As Tom recommended, here is the list of those who indicated here on
BobsyTalk that they are interested in purchasing the CNC Bobsy Badges, and
the number desired:
Paul Gelpi 2
Tom Quaranto 2
Bob Dustan 1
Bill Niemeyer 2
David Irwin 2
Tom Taft 2
Lee Johnson 2
John Furlow 2
John Benton 2
Ron Mong 6
Please let me know any additions or corrections ASAP, so I can update the
number to the CNC machinist.
Don
On Thu, Oct 21, 2021 at 8:30 AM Tom Quaranto <tquan277@xxxxxxxxx> wrote:
Don
Not to intrude into your affairs, but it may be helpful to post a list of
the people who have requested badges. This email chain while very useful
and informative, can be a bit confusing.
I don’t know if you have a price per badge yet but that info would also be
useful. I know when I did the run of rear uprites (while they were more
expensive) the count and price were certainly a consideration.
As I had said in a previous email I would like 2
Best
Tom Quaranto
Sent from my iPhone
On Oct 21, 2021, at 9:13 AM, Bob <lotus32@xxxxxxxxxxxxx> wrote:
Hello Don
If you have enough badges, I would like one as well for my SR-3.
Bob Dustan
----- Original Message -----
From: Don Anderson <donandersonracing@xxxxxxxxx>
To: BobsyTalk <bobsy_talk@xxxxxxxxxxxxx>
Sent: Wed, 20 Oct 2021 22:00:53 -0400 (EDT)
Subject: A Bobsy Talk Email: Re: Bobsy Badges
Bobsy Friends,
The CNC Bobsy badges are in progress. The final drawing is attached to this
email.
They will be very nice, with a threaded mounting boss on the back.
My CNC guy is swamped, and this small project is not a priority, but he'll
get to them.
Be Patient, it's worth the wait.
Don
