[blindreplay] Re: Replay Media Catcher 5 Helpful Notes
- From: "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx>
- To: <blindreplay@xxxxxxxxxxxxx>
- Date: Mon, 9 Dec 2013 18:31:01 -0500
Are you getting captures? Check your Library list view. Do not be concerned
with sound beeps for now. Press enter on Library control on main UI. Press
alt+l for the library menu, choose settings. Check to be sure the checkbox for
sound effects is check marked.
----- Original Message -----
From: Janie Landrum
To: blindreplay@xxxxxxxxxxxxx
Sent: Monday, December 09, 2013 5:12 PM
Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes
Hello, I have tried both ways still no sound.
Sent from my iPhone
On Dec 9, 2013, at 4:47 PM, "Life My Way" <lifemyway@xxxxxxxxx> wrote:
try this instead, where it says start monitaring press your enter key on it.
or do alt i and down arrow to start monitaring and enter. you should hear
the start sound.
these methods can be used for any screen reader.
----- Original Message -----
From: Petro T. Giannakopoulos
To: blindreplay@xxxxxxxxxxxxx
Sent: Monday, December 09, 2013 3:13 PM
Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes
Do you have Skype?
Try using your Window Eyes left mouse click on where it reads click to
start monitoring and let us know how it goes.
Tab and shift+tab back to the button and it should read as stop
monitoring.
----- Original Message -----
From: Janie Landrum
To: blindreplay@xxxxxxxxxxxxx
Sent: Monday, December 09, 2013 3:53 PM
Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes
Hello, Thank you for the help. I still can not get it to record. I
followed your directions to the letter. Still no go. How long should I wait for
the tone? I am using window eyes version 8.3. And a laptop. If you have any
more suggestions please let me know.
Sent from my iPhone
On Dec 8, 2013, at 3:50 PM, "Petro T. Giannakopoulos"
<petrogia@xxxxxxxxx> wrote:
Here are my notes for Replay Media Catcher 5.
Replay Media Catcher 5
Installation
No issues experienced with installation process.
Welcome
When you first run Replay Media Catcher 5 you will hear a welcome
window.
Choose the checkbox with spacebar to enable it and tab over to the OK
button and press ENTER key.
You don't need this welcome window.
This application has different interfaces.
Start Monitoring
Use alt-s
Stop Monitoring
alt-x
Read the user guide.
If you have scheduled a future capture / Download but have forgotten
to run the Replay Media Catcher 5 program, no problem because Replay Media
Catcher 5 will open itself and start the recording for you.
Configuring The Main Interface
With Replay Media Catcher running you should configure your main
interface, the UI by
Press enter key on Library tab/module
Press alt+v for the View toolbar menu
Press enter keyboard key on everything located in the view toolbar
that does not have a check mark next to it except for 'always on top'.
This will show all the modules/tabs that are available on the main
user interface. They are
Library
Internet
Audio
History
Guides
Schedule
The most important modules/tabs are,
Library
Internet
Audio
Schedule
When you are done go back with alt+v and make sure everything is
checked except for
the always on top.
JAWS Keystrokes for the List View
If you are in another module/tab please
Press enter keyboard key on the Library module/tab on the main user
interface.
Shift+tab will bring you to the Library list view
If you have captured something you can do the steps below but if not
please read on.
While in the list view you can use the following JAWS keystrokes to
hear
Name of your recording
Date
Status
To hear the name press
insert+ctrl+numbers row 1
To hear the date press
insert+ctrl+numbers row 2
To hear the status of your recording/download while in the list view
press
insert+ctrl+numbers row 3
The status will say downloading, complete and other info like error.
To hear the whole line press insert+up arrow.
Display the List view
Will make it much easier for you.
Choose the Library module/tab with ENTER key.
Press insert+t - the title bar should say library
Press alt+L to bring up the library toolbar
Choose display list view if it is not checked with your enter key
You have made the list view the default view on the main user
interface
OR
Choose the Library module/tab.
Use your tab keyboard key and locate the 'Display List View' button
and press your enter key.
Settings and Conversions Settings
Choose the Library module/tab on main interface.
Press alt+l.
The library menu has the
Settings
Conversions Settings
Choose Settings
The settings window opens
You should hear Settings tab
Use left or right arrow keyboard key to find the tab sheet you want
to configure and press your ENTER keyboard to make it the active tab.
Some main level tabs have sub level tabs so press your tab keyboard
key one time to find its sub level tabs.
Use left or right arrow keyboard key to find the sub level tab sheet
you want to configure and press your ENTER keyboard to make it the active tab.
For example, the Internet tab sheet has the sub level tabs Monitor,
plug-ins, rtmp, http and some others.
The Settings Window has
Library tab
Internet tab
Audio tab
History tab
For me the Library tab says checked. so I know I am in the Library
tab property sheet properties which I can examine by pressing my tab keyboard
key each time one by one.
While on a control within the tab sheet that is active insert+tab
will read that control for you.
Say you want to view the Internet tab sheet simply use the right
arrow key to find the internet tab and when you find it press your ENTER key
and JAWS will say checked.
The Internet tab is active.
You know now that you are in the Internet tab property sheet so press
your tab keyboard key to jump to the different settings you can configure.
Note, the Internet tab sheet has some additional sub level tab sheets
within it.
They are,
Monitor
http tab,
http adv tab,
rtmp tab,
rtmp adv tab,
dynamic tab
BT tab,
Naming tab,
Plugins tab,
ad blocker tab
These are tabs above so if you need to configure something within one
of these you will have to see which one is selected by hearing the word checked
pronounced by your screen reader.
For me the Monitor tab is checked. JAWS tells you it is by it
speaking Monitor tab checked.
Want to go to a different tab then use the steps above.
Start Monitoring
To start a capture of your media like a radio station stream do
Three methods
Press alt-s to start monitoring.
Or
Choose the Library module/tab on main interface.
Locate the click to Start Monitoring for downloads button on the main
user interface and press enter keyboard key.
You will hear a sound. This sound is telling you its ready to
capture/download.
If you do not see the 'start monitoring' on the main UI then you are
not in the Library module/tab so do
Press your tab key a few times until you land on the Library
module/tab and press your enter key on it.
Use your TAB keyboard key to find the click to start monitoring for
downloads button.
This will enable the click to start monitoring for downloads button
to appear again. Press enter key on start monitoring. Sound is heard.
Still do not hear the start monitoring feature then do
Find the Library module/tab on main UI and press enter.
Press alt+l for the library toolbar.
The Library toolbar appears.
Arrow down to the item 'start monitoring' and press your enter key on
it.
Sound will be heard.
Before you proceed to your media on the web I would tab over to the
Library list view on the main interface, minimize Replay Media Catcher or
alt+tab to your browser like Internet Explorer.
For example, play a YouTube video for 10-15 seconds and stop it with
either the stop button or alt+F4 to close your browser.
Now go back to Replay Media Catcher application and you should be
focused on the list view.
The list view will display your recordings/captures/downloads you
have in a list view style.
Playback a file that is located within the list view.
Locate the listview. If you do not see it.
Press enter on the Library module/tab .
Tab key a few times on the main UI and you will find the display list
view button. Press enter.
OR
Press alt+l for the Library toolbar and make sure display listview is
checked.
Locate the list view contents on main interface with the tab key.
When you find it your recordings/downloads will show up in the list view.
Press shift+F10 on a file in the listview.
You can do
Delete a file.
Rename
Remove
Play
Move To
Convert
Save to MP3
Fix FLV
Restart
Show in folder
Properties
Cancel
So to play a file press shift+F10 while on a file in the listview and
choose PLAY in the context menu.
If you are asked to download a player to play a file it is your
judgement to decide what to do here but if you've played that file type before
than choose NO when the pop up message appears.
You can play your files through the Windows Explorer.
Where are my files?
On main UI press enter on Library module/tab.
Press alt+l.
Choose open strorage folder.
Conversion Setting
If you want Replay Media Catcher to auto convert everything to a
particular format then do,
On the main UI press enter on Library module/tab. Press your tab key
a few times and locate the No Conversion Settings
Next press your spacebar key and down arrow key and you will hear the
context menu with submenus,
Media Players
Phones
Tablets
Game Consoles
Manufacturers
Formats
Output Folder
Don't Convert
Configure
Import into iTunes
Example, choose the Formats submenu and right arrow to open it.
Choose the format you desire within this list and press enter.
I chose MP3 Default in this list and press enter.
Tab over to Ok and press enter.
Now when you are back on the main UI of Replay Media Catcher 5 you
will see the format type you chose instead of No Conversion Type displayed.
If you do not see this then tab one time and then shift+tab.
For me it reads on the main UI Mp3 Defaults (MP3).
We are telling Replay Media Catcher 5 to automatically convert all
captures/recordings/downloads whether they are audio or video to MP3 format in
my example above. So if your video was .flv or mp4 Replay Media Catcher 5 is
going to convert to .mp3 and also keep the original file .flv or .mp4 also as
shown in this example.
You will have the original file and the converted file in both the
list view and Windows Explorer.
Example,
WGN.flv
WGN.mp3
How to Record Audio
Choose Library tab on main user interface.
Press your tab key a few times until you hear the Download from the
Internet button menu.
Press spacebar key on Download from the Internet menu button.
Press your down arrow key and when you hear Record Audio press your
enter key.
Record Audio is now the default.
Tab over one time.
You will hear Start Recording button.
Press the Start Recording button with enter key.
Play your media like with your browser.
Your audio is being captured.
To view what is being captured go to the Replay Media Catcher Library
list view contents.
When done close your browser.
To stop recording press the stop recording button.
To change it back to Download from the Internet button menu simply
spacebar on Record Audio and down arrow to Download from the Internet and press
enter.
If you cannot escape from here then do an alt+tab anb shift+tab to go
back to Replay Media Catcher 5.
You will notice that the Start Recording button has changed back to
Click To Start Monitoring For Downloads button when Download from the Internet
is active.
Developer wrote
RMC5 is a different product, with a modern interface and far more
features than anything AV or RMC4 had.
Understanding Replay Media Catcher
Below where it reads 'selected' means to press your keyboard enter
key on the module/tab.
Settings / Conversion Settings / Display Listview / Open Storage
Folder menu item is under the Library menu which is displayed when the main
Library tab/module is selected
Shortcut is
alt+l
Start/Stop recording menu item is under the Internet menu which is
displayed when the main Internet tab/module is selected. Internet menu/toolbar
shortcut is
alt+i
New Schedule menu item is under the Schedule menu which is displayed
when the Schedule tab/module is selected
Shortcut is alt+s
New - this is where you set timer style recording.
Edit
Copy
Delete
Run Now
Most menu items have keyboard short cuts where it makes sense
The Schedule Module/Tab and how to set a scheduled recording.
On Main UI press enter on Schedule Module/tab.
Use tab key to find the schedule for a future time button on main UI.
Press ENTER kER key.
Schedule window
To find your list of scheduled future recordings you must be in the
Schedule module/tab.
So on main UI of Replay Media Catcher 5 find the schedule module/tab
and press enter key.
Then tab until you find the Scheduled list view contents. Here you
will see your list of scheduled recordings you have set for a future time
period.
----- Original Message -----
From: Janie Landrum
To: blindreplay@xxxxxxxxxxxxx
Sent: Sunday, December 08, 2013 12:22 PM
Subject: [blindreplay] Re: My Audio Tutorials
Hi, Can you please email me your audio tutorial link for replay
media catcher version 5.0.1.1.9. I am having trouble getting mine to work
properly. I have been using replay catcher for years and love it. But this
version is giving me trouble. Any help would be appreash
Sent from my iPhone
On Dec 8, 2013, at 11:33 AM, "Petro T. Giannakopoulos"
<petrogia@xxxxxxxxx> wrote:
Hi All
Will be removing my audio tutorials on December 8 from Dropbox
which will mean the Dropbox links will not work when they are clicked on. I
will put these audio tutorials back up on Monday, December 9.
Other related posts:
