No captures. I think it is in window eyes I keep losing speech. Maybe I should go back to version 4. Sent from my iPhone > On Dec 9, 2013, at 6:31 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> > wrote: > > Are you getting captures? Check your Library list view. Do not be concerned > with sound beeps for now. Press enter on Library control on main UI. Press > alt+l for the library menu, choose settings. Check to be sure the checkbox > for sound effects is check marked. > > > > > > ----- Original Message ----- > From: Janie Landrum > To: blindreplay@xxxxxxxxxxxxx > Sent: Monday, December 09, 2013 5:12 PM > Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes > > Hello, I have tried both ways still no sound. > > Sent from my iPhone > >> On Dec 9, 2013, at 4:47 PM, "Life My Way" <lifemyway@xxxxxxxxx> wrote: >> >> try this instead, where it says start monitaring press your enter key on it. >> or do alt i and down arrow to start monitaring and enter. you should hear >> the start sound. >> these methods can be used for any screen reader. >> >> ----- Original Message ----- >> From: Petro T. Giannakopoulos >> To: blindreplay@xxxxxxxxxxxxx >> Sent: Monday, December 09, 2013 3:13 PM >> Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes >> >> Do you have Skype? >> Try using your Window Eyes left mouse click on where it reads click to start >> monitoring and let us know how it goes. >> >> Tab and shift+tab back to the button and it should read as stop monitoring. >> >> ----- Original Message ----- >> From: Janie Landrum >> To: blindreplay@xxxxxxxxxxxxx >> Sent: Monday, December 09, 2013 3:53 PM >> Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes >> >> Hello, Thank you for the help. I still can not get it to record. I >> followed your directions to the letter. Still no go. How long should I wait >> for the tone? I am using window eyes version 8.3. And a laptop. If you have >> any more suggestions please let me know. >> >> Sent from my iPhone >> >>> On Dec 8, 2013, at 3:50 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> >>> wrote: >>> >>> Here are my notes for Replay Media Catcher 5. >>> >>> Replay Media Catcher 5 >>> >>> Installation >>> No issues experienced with installation process. >>> >>> Welcome >>> >>> When you first run Replay Media Catcher 5 you will hear a welcome window. >>> >>> Choose the checkbox with spacebar to enable it and tab over to the OK >>> button and press ENTER key. >>> >>> You don't need this welcome window. >>> >>> This application has different interfaces. >>> >>> Start Monitoring >>> >>> Use alt-s >>> >>> Stop Monitoring >>> >>> alt-x >>> >>> Read the user guide. >>> >>> If you have scheduled a future capture / Download but have forgotten to run >>> the Replay Media Catcher 5 program, no problem because Replay Media Catcher >>> 5 will open itself and start the recording for you. >>> >>> Configuring The Main Interface >>> >>> With Replay Media Catcher running you should configure your main interface, >>> the UI by >>> >>> Press enter key on Library tab/module >>> >>> Press alt+v for the View toolbar menu >>> >>> Press enter keyboard key on everything located in the view toolbar that >>> does not have a check mark next to it except for 'always on top'. >>> >>> This will show all the modules/tabs that are available on the main user >>> interface. They are >>> >>> Library >>> >>> Internet >>> >>> Audio >>> >>> History >>> >>> Guides >>> >>> Schedule >>> >>> The most important modules/tabs are, >>> >>> Library >>> >>> Internet >>> >>> Audio >>> >>> Schedule >>> >>> When you are done go back with alt+v and make sure everything is checked >>> except for >>> >>> the always on top. >>> >>> JAWS Keystrokes for the List View >>> >>> If you are in another module/tab please >>> >>> Press enter keyboard key on the Library module/tab on the main user >>> interface. >>> >>> Shift+tab will bring you to the Library list view >>> >>> If you have captured something you can do the steps below but if not please >>> read on. >>> >>> While in the list view you can use the following JAWS keystrokes to hear >>> >>> Name of your recording >>> >>> Date >>> >>> Status >>> >>> To hear the name press >>> >>> insert+ctrl+numbers row 1 >>> >>> To hear the date press >>> >>> insert+ctrl+numbers row 2 >>> >>> To hear the status of your recording/download while in the list view press >>> >>> insert+ctrl+numbers row 3 >>> >>> The status will say downloading, complete and other info like error. >>> >>> To hear the whole line press insert+up arrow. >>> >>> Display the List view >>> >>> Will make it much easier for you. >>> >>> Choose the Library module/tab with ENTER key. >>> >>> Press insert+t - the title bar should say library >>> >>> Press alt+L to bring up the library toolbar >>> >>> Choose display list view if it is not checked with your enter key >>> >>> You have made the list view the default view on the main user interface >>> >>> OR >>> >>> Choose the Library module/tab. >>> >>> Use your tab keyboard key and locate the 'Display List View' button and >>> press your enter key. >>> >>> Settings and Conversions Settings >>> >>> Choose the Library module/tab on main interface. >>> >>> Press alt+l. >>> >>> The library menu has the >>> >>> Settings >>> >>> Conversions Settings >>> >>> Choose Settings >>> >>> The settings window opens >>> >>> You should hear Settings tab >>> >>> Use left or right arrow keyboard key to find the tab sheet you want to >>> configure and press your ENTER keyboard to make it the active tab. >>> >>> Some main level tabs have sub level tabs so press your tab keyboard key one >>> time to find its sub level tabs. >>> >>> Use left or right arrow keyboard key to find the sub level tab sheet you >>> want to configure and press your ENTER keyboard to make it the active tab. >>> >>> For example, the Internet tab sheet has the sub level tabs Monitor, >>> plug-ins, rtmp, http and some others. >>> >>> The Settings Window has >>> >>> Library tab >>> >>> Internet tab >>> >>> Audio tab >>> >>> History tab >>> >>> For me the Library tab says checked. so I know I am in the Library tab >>> property sheet properties which I can examine by pressing my tab >>> keyboard key each time one by one. >>> >>> While on a control within the tab sheet that is active insert+tab will read >>> that control for you. >>> >>> Say you want to view the Internet tab sheet simply use the right arrow key >>> to find the internet tab and when you find it press your ENTER key and JAWS >>> will say checked. >>> >>> The Internet tab is active. >>> >>> You know now that you are in the Internet tab property sheet so press your >>> tab keyboard key to jump to the different settings you can configure. >>> >>> Note, the Internet tab sheet has some additional sub level tab sheets >>> within it. >>> >>> They are, >>> >>> Monitor >>> >>> http tab, >>> >>> http adv tab, >>> >>> rtmp tab, >>> >>> rtmp adv tab, >>> >>> dynamic tab >>> >>> BT tab, >>> >>> Naming tab, >>> >>> Plugins tab, >>> >>> ad blocker tab >>> >>> These are tabs above so if you need to configure something within one of >>> these you will have to see which one is selected by hearing the word >>> checked pronounced by your screen reader. >>> >>> For me the Monitor tab is checked. JAWS tells you it is by it speaking >>> Monitor tab checked. >>> >>> Want to go to a different tab then use the steps above. >>> >>> Start Monitoring >>> >>> To start a capture of your media like a radio station stream do >>> >>> Three methods >>> >>> Press alt-s to start monitoring. >>> >>> Or >>> >>> Choose the Library module/tab on main interface. >>> >>> Locate the click to Start Monitoring for downloads button on the main user >>> interface and press enter keyboard key. >>> >>> You will hear a sound. This sound is telling you its ready to >>> capture/download. >>> >>> If you do not see the 'start monitoring' on the main UI then you are not in >>> the Library module/tab so do >>> >>> Press your tab key a few times until you land on the Library module/tab and >>> press your enter key on it. >>> >>> Use your TAB keyboard key to find the click to start monitoring for >>> downloads button. >>> >>> This will enable the click to start monitoring for downloads button to >>> appear again. Press enter key on start monitoring. Sound is heard. >>> >>> Still do not hear the start monitoring feature then do >>> >>> Find the Library module/tab on main UI and press enter. >>> >>> Press alt+l for the library toolbar. >>> >>> The Library toolbar appears. >>> >>> Arrow down to the item 'start monitoring' and press your enter key on it. >>> >>> Sound will be heard. >>> >>> Before you proceed to your media on the web I would tab over to the Library >>> list view on the main interface, minimize Replay Media Catcher or alt+tab >>> to your browser like Internet Explorer. >>> >>> For example, play a YouTube video for 10-15 seconds and stop it with either >>> the stop button or alt+F4 to close your browser. >>> >>> Now go back to Replay Media Catcher application and you should be focused >>> on the list view. >>> >>> The list view will display your recordings/captures/downloads you have in a >>> list view style. >>> >>> Playback a file that is located within the list view. >>> >>> Locate the listview. If you do not see it. >>> >>> Press enter on the Library module/tab . >>> >>> Tab key a few times on the main UI and you will find the display list view >>> button. Press enter. >>> >>> OR >>> >>> Press alt+l for the Library toolbar and make sure display listview is >>> checked. >>> >>> Locate the list view contents on main interface with the tab key. When you >>> find it your recordings/downloads will show up in the list view. >>> >>> Press shift+F10 on a file in the listview. >>> >>> You can do >>> >>> Delete a file. >>> >>> Rename >>> >>> Remove >>> >>> Play >>> >>> Move To >>> >>> Convert >>> >>> Save to MP3 >>> >>> Fix FLV >>> >>> Restart >>> >>> Show in folder >>> >>> Properties >>> >>> Cancel >>> >>> So to play a file press shift+F10 while on a file in the listview and >>> choose PLAY in the context menu. >>> >>> If you are asked to download a player to play a file it is your judgement >>> to decide what to do here but if you've played that file type before than >>> choose NO when the pop up message appears. >>> >>> You can play your files through the Windows Explorer. >>> >>> Where are my files? >>> >>> On main UI press enter on Library module/tab. >>> >>> Press alt+l. >>> >>> Choose open strorage folder. >>> >>> Conversion Setting >>> >>> If you want Replay Media Catcher to auto convert everything to a particular >>> format then do, >>> >>> On the main UI press enter on Library module/tab. Press your tab key a few >>> times and locate the No Conversion Settings >>> >>> Next press your spacebar key and down arrow key and you will hear the >>> context menu with submenus, >>> >>> Media Players >>> >>> Phones >>> >>> Tablets >>> >>> Game Consoles >>> >>> Manufacturers >>> >>> Formats >>> >>> Output Folder >>> >>> Don't Convert >>> >>> Configure >>> >>> Import into iTunes >>> >>> Example, choose the Formats submenu and right arrow to open it. Choose the >>> format you desire within this list and press enter. >>> >>> I chose MP3 Default in this list and press enter. >>> >>> Tab over to Ok and press enter. >>> >>> Now when you are back on the main UI of Replay Media Catcher 5 you will see >>> the format type you chose instead of No Conversion Type displayed. >>> >>> If you do not see this then tab one time and then shift+tab. >>> >>> For me it reads on the main UI Mp3 Defaults (MP3). >>> >>> We are telling Replay Media Catcher 5 to automatically convert all >>> captures/recordings/downloads whether they are audio or video to MP3 format >>> in my example above. So if your video was .flv or mp4 Replay Media Catcher >>> 5 is going to convert to .mp3 and also keep the original file .flv or .mp4 >>> also as shown in this example. >>> >>> You will have the original file and the converted file in both the list >>> view and Windows Explorer. >>> >>> Example, >>> >>> WGN.flv >>> >>> WGN.mp3 >>> >>> How to Record Audio >>> >>> Choose Library tab on main user interface. >>> >>> Press your tab key a few times until you hear the Download from the >>> Internet button menu. >>> >>> Press spacebar key on Download from the Internet menu button. >>> >>> Press your down arrow key and when you hear Record Audio press your enter >>> key. >>> >>> Record Audio is now the default. >>> >>> Tab over one time. >>> >>> You will hear Start Recording button. >>> >>> Press the Start Recording button with enter key. >>> >>> Play your media like with your browser. >>> >>> Your audio is being captured. >>> >>> To view what is being captured go to the Replay Media Catcher Library list >>> view contents. >>> >>> When done close your browser. >>> >>> To stop recording press the stop recording button. >>> >>> To change it back to Download from the Internet button menu simply spacebar >>> on Record Audio and down arrow to Download from the Internet and press >>> enter. >>> >>> If you cannot escape from here then do an alt+tab anb shift+tab to go back >>> to Replay Media Catcher 5. >>> >>> You will notice that the Start Recording button has changed back to Click >>> To Start Monitoring For Downloads button when Download from the Internet is >>> active. >>> >>> Developer wrote >>> >>> RMC5 is a different product, with a modern interface and far more features >>> than anything AV or RMC4 had. >>> >>> Understanding Replay Media Catcher >>> >>> Below where it reads 'selected' means to press your keyboard enter key on >>> the module/tab. >>> >>> Settings / Conversion Settings / Display Listview / Open Storage Folder >>> menu item is under the Library menu which is displayed when the main >>> Library tab/module is selected >>> >>> Shortcut is >>> >>> alt+l >>> >>> Start/Stop recording menu item is under the Internet menu which is >>> displayed when the main Internet tab/module is selected. Internet >>> menu/toolbar shortcut is >>> >>> alt+i >>> >>> New Schedule menu item is under the Schedule menu which is displayed when >>> the Schedule tab/module is selected >>> >>> Shortcut is alt+s >>> >>> New - this is where you set timer style recording. >>> >>> Edit >>> >>> Copy >>> >>> Delete >>> >>> Run Now >>> >>> Most menu items have keyboard short cuts where it makes sense >>> >>> The Schedule Module/Tab and how to set a scheduled recording. >>> >>> On Main UI press enter on Schedule Module/tab. >>> >>> Use tab key to find the schedule for a future time button on main UI. >>> >>> Press ENTER kER key. >>> >>> Schedule window >>> >>> To find your list of scheduled future recordings you must be in the >>> Schedule module/tab. >>> >>> So on main UI of Replay Media Catcher 5 find the schedule module/tab and >>> press enter key. >>> >>> Then tab until you find the Scheduled list view contents. Here you will see >>> your list of scheduled recordings you have set for a future time period. >>> >>> >>> ----- Original Message ----- >>> From: Janie Landrum >>> To: blindreplay@xxxxxxxxxxxxx >>> Sent: Sunday, December 08, 2013 12:22 PM >>> Subject: [blindreplay] Re: My Audio Tutorials >>> >>> Hi, Can you please email me your audio tutorial link for replay media >>> catcher version 5.0.1.1.9. I am having trouble getting mine to work >>> properly. I have been using replay catcher for years and love it. But this >>> version is giving me trouble. Any help would be appreash >>> >>> Sent from my iPhone >>> >>>> On Dec 8, 2013, at 11:33 AM, "Petro T. Giannakopoulos" >>>> <petrogia@xxxxxxxxx> wrote: >>>> >>>> Hi All >>>> Will be removing my audio tutorials on December 8 from Dropbox which will >>>> mean the Dropbox links will not work when they are clicked on. I will put >>>> these audio tutorials back up on Monday, December 9.