Please wait to hear from Jeff at Applian. He should help you with this. ----- Original Message ----- From: Janie Landrum To: blindreplay@xxxxxxxxxxxxx Sent: Monday, December 09, 2013 7:12 PM Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes No captures. I think it is in window eyes I keep losing speech. Maybe I should go back to version 4. Sent from my iPhone On Dec 9, 2013, at 6:31 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> wrote: Are you getting captures? Check your Library list view. Do not be concerned with sound beeps for now. Press enter on Library control on main UI. Press alt+l for the library menu, choose settings. Check to be sure the checkbox for sound effects is check marked. ----- Original Message ----- From: Janie Landrum To: blindreplay@xxxxxxxxxxxxx Sent: Monday, December 09, 2013 5:12 PM Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes Hello, I have tried both ways still no sound. Sent from my iPhone On Dec 9, 2013, at 4:47 PM, "Life My Way" <lifemyway@xxxxxxxxx> wrote: try this instead, where it says start monitaring press your enter key on it. or do alt i and down arrow to start monitaring and enter. you should hear the start sound. these methods can be used for any screen reader. ----- Original Message ----- From: Petro T. Giannakopoulos To: blindreplay@xxxxxxxxxxxxx Sent: Monday, December 09, 2013 3:13 PM Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes Do you have Skype? Try using your Window Eyes left mouse click on where it reads click to start monitoring and let us know how it goes. Tab and shift+tab back to the button and it should read as stop monitoring. ----- Original Message ----- From: Janie Landrum To: blindreplay@xxxxxxxxxxxxx Sent: Monday, December 09, 2013 3:53 PM Subject: [blindreplay] Re: Replay Media Catcher 5 Helpful Notes Hello, Thank you for the help. I still can not get it to record. I followed your directions to the letter. Still no go. How long should I wait for the tone? I am using window eyes version 8.3. And a laptop. If you have any more suggestions please let me know. Sent from my iPhone On Dec 8, 2013, at 3:50 PM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> wrote: Here are my notes for Replay Media Catcher 5. Replay Media Catcher 5 Installation No issues experienced with installation process. Welcome When you first run Replay Media Catcher 5 you will hear a welcome window. Choose the checkbox with spacebar to enable it and tab over to the OK button and press ENTER key. You don't need this welcome window. This application has different interfaces. Start Monitoring Use alt-s Stop Monitoring alt-x Read the user guide. If you have scheduled a future capture / Download but have forgotten to run the Replay Media Catcher 5 program, no problem because Replay Media Catcher 5 will open itself and start the recording for you. Configuring The Main Interface With Replay Media Catcher running you should configure your main interface, the UI by Press enter key on Library tab/module Press alt+v for the View toolbar menu Press enter keyboard key on everything located in the view toolbar that does not have a check mark next to it except for 'always on top'. This will show all the modules/tabs that are available on the main user interface. They are Library Internet Audio History Guides Schedule The most important modules/tabs are, Library Internet Audio Schedule When you are done go back with alt+v and make sure everything is checked except for the always on top. JAWS Keystrokes for the List View If you are in another module/tab please Press enter keyboard key on the Library module/tab on the main user interface. Shift+tab will bring you to the Library list view If you have captured something you can do the steps below but if not please read on. While in the list view you can use the following JAWS keystrokes to hear Name of your recording Date Status To hear the name press insert+ctrl+numbers row 1 To hear the date press insert+ctrl+numbers row 2 To hear the status of your recording/download while in the list view press insert+ctrl+numbers row 3 The status will say downloading, complete and other info like error. To hear the whole line press insert+up arrow. Display the List view Will make it much easier for you. Choose the Library module/tab with ENTER key. Press insert+t - the title bar should say library Press alt+L to bring up the library toolbar Choose display list view if it is not checked with your enter key You have made the list view the default view on the main user interface OR Choose the Library module/tab. Use your tab keyboard key and locate the 'Display List View' button and press your enter key. Settings and Conversions Settings Choose the Library module/tab on main interface. Press alt+l. The library menu has the Settings Conversions Settings Choose Settings The settings window opens You should hear Settings tab Use left or right arrow keyboard key to find the tab sheet you want to configure and press your ENTER keyboard to make it the active tab. Some main level tabs have sub level tabs so press your tab keyboard key one time to find its sub level tabs. Use left or right arrow keyboard key to find the sub level tab sheet you want to configure and press your ENTER keyboard to make it the active tab. For example, the Internet tab sheet has the sub level tabs Monitor, plug-ins, rtmp, http and some others. The Settings Window has Library tab Internet tab Audio tab History tab For me the Library tab says checked. so I know I am in the Library tab property sheet properties which I can examine by pressing my tab keyboard key each time one by one. While on a control within the tab sheet that is active insert+tab will read that control for you. Say you want to view the Internet tab sheet simply use the right arrow key to find the internet tab and when you find it press your ENTER key and JAWS will say checked. The Internet tab is active. You know now that you are in the Internet tab property sheet so press your tab keyboard key to jump to the different settings you can configure. Note, the Internet tab sheet has some additional sub level tab sheets within it. They are, Monitor http tab, http adv tab, rtmp tab, rtmp adv tab, dynamic tab BT tab, Naming tab, Plugins tab, ad blocker tab These are tabs above so if you need to configure something within one of these you will have to see which one is selected by hearing the word checked pronounced by your screen reader. For me the Monitor tab is checked. JAWS tells you it is by it speaking Monitor tab checked. Want to go to a different tab then use the steps above. Start Monitoring To start a capture of your media like a radio station stream do Three methods Press alt-s to start monitoring. Or Choose the Library module/tab on main interface. Locate the click to Start Monitoring for downloads button on the main user interface and press enter keyboard key. You will hear a sound. This sound is telling you its ready to capture/download. If you do not see the 'start monitoring' on the main UI then you are not in the Library module/tab so do Press your tab key a few times until you land on the Library module/tab and press your enter key on it. Use your TAB keyboard key to find the click to start monitoring for downloads button. This will enable the click to start monitoring for downloads button to appear again. Press enter key on start monitoring. Sound is heard. Still do not hear the start monitoring feature then do Find the Library module/tab on main UI and press enter. Press alt+l for the library toolbar. The Library toolbar appears. Arrow down to the item 'start monitoring' and press your enter key on it. Sound will be heard. Before you proceed to your media on the web I would tab over to the Library list view on the main interface, minimize Replay Media Catcher or alt+tab to your browser like Internet Explorer. For example, play a YouTube video for 10-15 seconds and stop it with either the stop button or alt+F4 to close your browser. Now go back to Replay Media Catcher application and you should be focused on the list view. The list view will display your recordings/captures/downloads you have in a list view style. Playback a file that is located within the list view. Locate the listview. If you do not see it. Press enter on the Library module/tab . Tab key a few times on the main UI and you will find the display list view button. Press enter. OR Press alt+l for the Library toolbar and make sure display listview is checked. Locate the list view contents on main interface with the tab key. When you find it your recordings/downloads will show up in the list view. Press shift+F10 on a file in the listview. You can do Delete a file. Rename Remove Play Move To Convert Save to MP3 Fix FLV Restart Show in folder Properties Cancel So to play a file press shift+F10 while on a file in the listview and choose PLAY in the context menu. If you are asked to download a player to play a file it is your judgement to decide what to do here but if you've played that file type before than choose NO when the pop up message appears. You can play your files through the Windows Explorer. Where are my files? On main UI press enter on Library module/tab. Press alt+l. Choose open strorage folder. Conversion Setting If you want Replay Media Catcher to auto convert everything to a particular format then do, On the main UI press enter on Library module/tab. Press your tab key a few times and locate the No Conversion Settings Next press your spacebar key and down arrow key and you will hear the context menu with submenus, Media Players Phones Tablets Game Consoles Manufacturers Formats Output Folder Don't Convert Configure Import into iTunes Example, choose the Formats submenu and right arrow to open it. Choose the format you desire within this list and press enter. I chose MP3 Default in this list and press enter. Tab over to Ok and press enter. Now when you are back on the main UI of Replay Media Catcher 5 you will see the format type you chose instead of No Conversion Type displayed. If you do not see this then tab one time and then shift+tab. For me it reads on the main UI Mp3 Defaults (MP3). We are telling Replay Media Catcher 5 to automatically convert all captures/recordings/downloads whether they are audio or video to MP3 format in my example above. So if your video was .flv or mp4 Replay Media Catcher 5 is going to convert to .mp3 and also keep the original file .flv or .mp4 also as shown in this example. You will have the original file and the converted file in both the list view and Windows Explorer. Example, WGN.flv WGN.mp3 How to Record Audio Choose Library tab on main user interface. Press your tab key a few times until you hear the Download from the Internet button menu. Press spacebar key on Download from the Internet menu button. Press your down arrow key and when you hear Record Audio press your enter key. Record Audio is now the default. Tab over one time. You will hear Start Recording button. Press the Start Recording button with enter key. Play your media like with your browser. Your audio is being captured. To view what is being captured go to the Replay Media Catcher Library list view contents. When done close your browser. To stop recording press the stop recording button. To change it back to Download from the Internet button menu simply spacebar on Record Audio and down arrow to Download from the Internet and press enter. If you cannot escape from here then do an alt+tab anb shift+tab to go back to Replay Media Catcher 5. You will notice that the Start Recording button has changed back to Click To Start Monitoring For Downloads button when Download from the Internet is active. Developer wrote RMC5 is a different product, with a modern interface and far more features than anything AV or RMC4 had. Understanding Replay Media Catcher Below where it reads 'selected' means to press your keyboard enter key on the module/tab. Settings / Conversion Settings / Display Listview / Open Storage Folder menu item is under the Library menu which is displayed when the main Library tab/module is selected Shortcut is alt+l Start/Stop recording menu item is under the Internet menu which is displayed when the main Internet tab/module is selected. Internet menu/toolbar shortcut is alt+i New Schedule menu item is under the Schedule menu which is displayed when the Schedule tab/module is selected Shortcut is alt+s New - this is where you set timer style recording. Edit Copy Delete Run Now Most menu items have keyboard short cuts where it makes sense The Schedule Module/Tab and how to set a scheduled recording. On Main UI press enter on Schedule Module/tab. Use tab key to find the schedule for a future time button on main UI. Press ENTER kER key. Schedule window To find your list of scheduled future recordings you must be in the Schedule module/tab. So on main UI of Replay Media Catcher 5 find the schedule module/tab and press enter key. Then tab until you find the Scheduled list view contents. Here you will see your list of scheduled recordings you have set for a future time period. ----- Original Message ----- From: Janie Landrum To: blindreplay@xxxxxxxxxxxxx Sent: Sunday, December 08, 2013 12:22 PM Subject: [blindreplay] Re: My Audio Tutorials Hi, Can you please email me your audio tutorial link for replay media catcher version 220.127.116.11.9. I am having trouble getting mine to work properly. I have been using replay catcher for years and love it. But this version is giving me trouble. Any help would be appreash Sent from my iPhone On Dec 8, 2013, at 11:33 AM, "Petro T. Giannakopoulos" <petrogia@xxxxxxxxx> wrote: Hi All Will be removing my audio tutorials on December 8 from Dropbox which will mean the Dropbox links will not work when they are clicked on. I will put these audio tutorials back up on Monday, December 9.