[bksvol-discuss] Re: Openbook Settings
- From: "Gerald Hovas" <GeraldHovas@xxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Mon, 12 Jun 2006 10:09:01 -0500
Evan,
I must have misunderstood you then, because I thought you said that is what
you got when you kept Collumn Recognition off. BTW, I keep it on all the
time now and haven't had that problem since a time or two in my first
submissions, and I can't be sure what I had it set to back then.
Gerald
-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Evan Reese
Sent: Monday, June 12, 2006 9:58 AM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: Openbook Settings
As far as column detection goes, I kept it on while scanning a book and got
hard returns at the end of every line. So I think it should be turned off
unless you have text in columns where you would certainly need it, such as
for an index or something. Keeping it on means that the scanner thinks that
every line of text is part of a column and should be separate from the text
to the side on the same line, so apparently puts hard returns to ensure that
the columns are separated. But that's just a guess. What I do know is that
having done it, I can say that that's not what you want your text to have,
unless it is in columns, of course.
----- Original Message -----
From: "Gerald Hovas" <GeraldHovas@xxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Sunday, June 11, 2006 10:23 PM
Subject: [bksvol-discuss] Re: Openbook Settings
> Monica,
>
> I keep all of them turned off.
>
> It's my understanding that Despeckle can interfere with accent marks.
>
> There's really no reason to have White on Black turned on unless you know
> you're going to need it, and in my experience, that's rare. It's
> possible,
> too, that having this on can cause the OCR software to try to find text in
> places it shouldn't, like places where a library book has gotten a bit
> dirty.
>
> Also, unless you know you have a foreign language in the book and know
> which
> to expect, there doesn't seem to be any advantage for having Language
> Analysis turned on. I have a suspission, too, that Language Analysis also
> uses a form of AutoCorrection like OpenBook uses which can cause similar
> problems because I sometimes seem to get better results having it off. If
> you like to scan SciFi or Fantasy books or other books with unusual
> writing
> styles like the Mitford books, then it probably does more harm than good.
>
> BTW, I have OCR Correction turned off as well because you can't load
> different dictionaries for different writing styles or classes of books,
> and
> a single one in my opinion can't handle the job for as many different
> types
> of books as I like to scan. It also has some known incorrect entries, so
> I
> don't trust it even though I've fixed the ones I know about. When you get
> right down to it, it's a form of global search and replace, and blindly
> making those can bite you unless you really know what you're replacing,
> and
> as I mentioned above, what is safe in one type of book might not be safe
> in
> all types of books.
>
> All of these settings just cause the OCR Software to have to think harder
> and longer and can cause as many errors as they solve if not used under
> the
> right conditions.
>
> I also recommend keeping Collumn Recognition turned on because someone has
> suggested that not having it on is the reason why some books have a Hard
> Return added at the end of every line in the printed book. Still need to
> confirm that, though. Besides, it can bail you out if you're scanning two
> pages at once and the OCR software fails to realize that you've scanned
> two
> pages and not a two collumn page plus a blank page. You'll need to turn
> it
> off, though, when scanning pages with tables, like the Table of Contents.
>
> That's all I can think of off the top of my head. Perhaps Jake or Pratik
> has some other thoughts on the subject.
>
> HTH
>
> Gerald
>
> -----Original Message-----
> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Monica Willyard
> Sent: Sunday, June 11, 2006 11:35 PM
> To: bksvol-discuss@xxxxxxxxxxxxx
> Subject: [bksvol-discuss] Openbook Settings
>
> I know there are several Openbook users on this list who turn out
> some good scans. I've found 3 settings in the scanning settings area
> that I'd like to know how you handle. There is a checkbox for
> despeckle and another for white on black. Finally, there is a
> setting called language analyst. I currently have all 3 of these
> turned on. Should I have these on by default, or are some of these
> settings meant for specific and somewhat rare situations? I scan
> books exclusively, no newspapers or faxes. I appreciate any feedback
> anyone has to offer. (smile)
>
>
> Monica
> Visit my blog at: http://plumlipstick.livejournal.com
>
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line. To get a list
> of
> available commands, put the word 'help' by itself in the subject line.
>
> To unsubscribe from this list send a blank Email to
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line. To get a list
> of available commands, put the word 'help' by itself in the subject line.
>
>
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
Other related posts:
