[bksvol-discuss] Re: Jumper bso weirdness, continued

  • From: "My Nickels Worth" <lavendar@xxxxxxxxx>
  • To: <bksvol-discuss@xxxxxxxxxxxxx>
  • Date: Sun, 28 Dec 2008 16:49:07 -0500

Hmm.. Ok, I'll try that.

Incidentally, my husband, Mark, who is much more savvy with Word then I, is
trying to help me with this.   He discovered that the fonts are all mixed
up, and that doesn't of course, show up when you're reading with K1000,
unless you check.  He actually checked when using Word, and some lines only
had one or two words on them because of big fonts, etc.

I'll try the paper size deal and see what happens.

Cait


-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Mayrie ReNae
Sent: Sunday, December 28, 2008 4:05 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: Jumper bso weirdness, continued


Hi Cait!

        Try increasing the paper size even more.  Use "custom" then you can
put something huge like 22 in the page length in inches.  I'll bet that
fixes it.

Good luck!

Mayrie

 

-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of My Nickels Worth
Sent: Sunday, December 28, 2008 12:59 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Jumper bso weirdness, continued

Ok, I went ahead and changed the paper size in Word from letter to Legal, as
Christina suggested.  That took the document from 553 pages down to 467
pages.. Any other suggestions?  In /through all this, Kersi is still adament
that the same document is 353 pages.

Cait 


 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of
available commands, put the word 'help' by itself in the subject line.

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of 
available commands, put the word 'help' by itself in the subject line.

Other related posts: