[bksvol-discuss] Re: Jumper bso weirdness, continued

  • From: "Mayrie ReNae" <mayrierenae@xxxxxxxxx>
  • To: <bksvol-discuss@xxxxxxxxxxxxx>
  • Date: Sun, 28 Dec 2008 20:15:24 -0800

Hi Cait,

        Sorry, I just answered his question and what I told him you have
already done.

Mayrie

 

-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of My Nickels Worth
Sent: Sunday, December 28, 2008 3:59 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: Jumper bso weirdness, continued

Mark, my husband, just asked this question on the k1000 list.  Incidentally,
he's also totally blind.  He just knew to chekck the fonts, etc, because he
uses Word a bunch for work.  If I find out anything, I'll gladly pass it
along to this list so others will have the info if they need it.

Cait


-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Jill O'Connell
Sent: Wednesday, January 02, 2002 9:09 AM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] Re: Jumper bso weirdness, continued


Mayrie, Have you ever run this question by Steven Baum? When using a screen 
reader, we don't know whether the font size varies or not. Also we don't 
even know which words are in bold etc. And, of course, in braille or speech 
it doesn't matter. Maybe I should read Kurzweil's manual about fonts since 
when I have to fill in chapter titles, etc. I don't change the font.
----- Original Message ----- 
From: "Mayrie ReNae" <mayrierenae@xxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Sunday, December 28, 2008 2:02 PM
Subject: [bksvol-discuss] Re: Jumper bso weirdness, continued


> Hi Cait!
>
> I always standardize font by using either the font dialogue in Word or 
> Kurzweil.  Sighted readers have said that Times New Roman at 12 point 
> is comfortable for reading.  If you want to be more true to the actual 
> text of
> books, allow all bolding and italics to remain and then increase chapter 
> or
> story titles to a larger font, perhaps 16.  This results in a much nicer
> looking book.  For some reason, the font sizes are not accurately
> represented when OCRing using Kurzweil.  I have no idea whether this is
> because of the scanning or the recognition.  And the standardizing of font
> only takes about half a minute for the whole document.
>
> Mayrie
>
>
>
> -----Original Message-----
> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of My Nickels 
> Worth
> Sent: Sunday, December 28, 2008 1:49 PM
> To: bksvol-discuss@xxxxxxxxxxxxx
> Subject: [bksvol-discuss] Re: Jumper bso weirdness, continued
>
> Hmm.. Ok, I'll try that.
>
> Incidentally, my husband, Mark, who is much more savvy with Word then 
> I,
> is
> trying to help me with this.   He discovered that the fonts are all mixed
> up, and that doesn't of course, show up when you're reading with K1000,
> unless you check.  He actually checked when using Word, and some lines 
> only
> had one or two words on them because of big fonts, etc.
>
> I'll try the paper size deal and see what happens.
>
> Cait
>
>
> -----Original Message-----
> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Mayrie ReNae
> Sent: Sunday, December 28, 2008 4:05 PM
> To: bksvol-discuss@xxxxxxxxxxxxx
> Subject: [bksvol-discuss] Re: Jumper bso weirdness, continued
>
>
> Hi Cait!
>
> Try increasing the paper size even more.  Use "custom" then you can 
> put something huge like 22 in the page length in inches.  I'll bet 
> that fixes it.
>
> Good luck!
>
> Mayrie
>
>
>
> -----Original Message-----
> From: bksvol-discuss-bounce@xxxxxxxxxxxxx
> [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of My Nickels 
> Worth
> Sent: Sunday, December 28, 2008 12:59 PM
> To: bksvol-discuss@xxxxxxxxxxxxx
> Subject: [bksvol-discuss] Jumper bso weirdness, continued
>
> Ok, I went ahead and changed the paper size in Word from letter to 
> Legal,
> as
> Christina suggested.  That took the document from 553 pages down to 467
> pages.. Any other suggestions?  In /through all this, Kersi is still 
> adament
> that the same document is 353 pages.
>
> Cait
>
>
> To unsubscribe from this list send a blank Email to 
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line.  To get a 
> list
> of
> available commands, put the word 'help' by itself in the subject line.
>
> To unsubscribe from this list send a blank Email to 
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line.  To get a 
> list
> of
> available commands, put the word 'help' by itself in the subject line.
>
> To unsubscribe from this list send a blank Email to 
> bksvol-discuss-request@xxxxxxxxxxxxx
> put the word 'unsubscribe' by itself in the subject line.  To get a 
> list
> of available commands, put the word 'help' by itself in the subject line.
>


----------------------------------------------------------------------------
----



No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.200 / Virus Database: 270.10.1/1867 - Release Date: 12/28/2008 
2:23 PM

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of
available commands, put the word 'help' by itself in the subject line.

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of
available commands, put the word 'help' by itself in the subject line.

 To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line.  To get a list of 
available commands, put the word 'help' by itself in the subject line.

Other related posts:

  1. Home
  2. bksvol-discuss
  3. Archive
  4. 12-2008