Thanks Dan. My problem is compounded by the fact I also have a broken drill bit
in there too. It's starting to sound like I will have to take the mount head to
a machine shop.
On Mar 17, 2016, at 6:22 PM, Dan Heim <dan@xxxxxxxxxxxxx> wrote:--
Hey Albert,
I had a similar problem, not on my Takahashi but on my VW. Long story
short, what I did was use a Dremel to cut a groove in the top of the
broken screw, hit it with some WD40, and then backed it out with a small
screwdriver. Don't know how much of the screw you can reach, but it
worked for me.
Dan Heim
On 3/17/2016 5:57 PM, Albert Barr wrote:
I am having a problem with my Takahashi EM 400 Temma 2 mount. There is a
small screw that needs to be loosened near the polar scope so you can set
the offset based on your geographic location.
That screw broke a year ago. I got a replacement sent to me from Japan and
thought it would be an easy fix using a drill bit that can unscrew broken
screws and bolts.Well I tried that for quite some time and the bit
eventually broke inside the screw hole.
Even if I got a new part to replace all this I can’t unscrew the ring
because the original broken screw keeps the ring from moving. I am wondering
if any of you know someone or perhaps a machine shop that might be familiar
with astronomy equipment who can fix this. I am, of course, willing to pay
for someone’s time.
I’ve attached a DropBox link. The problem is the hole directly to the left
of the scale.
Many thanks
Albert
https://www.dropbox.com/sh/vzhnbdm2vs78nqk/AAB2WCdbbPlNbzAc0eV5SHiDa?dl=0 ;
<https://www.dropbox.com/sh/vzhnbdm2vs78nqk/AAB2WCdbbPlNbzAc0eV5SHiDa?dl=0>
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.
--
See message header for info on list archives or unsubscribing, and please
send personal replies to the author, not the list.