Tube only (in carbon fiber with XLT coatings) and with dovetail for CG-5 attached. My mount is the CG-5 Advanced Series Go To mount, but the case would work for any dovetail for any CG-5. ----- Original Message ----- From: <DBogan3220@xxxxxxx> To: <az-observing@xxxxxxxxxxxxx> Sent: Monday, July 12, 2004 5:22 AM Subject: [AZ-Observing] Re: A Cheap, Nice Case for Your C9.25 SCT > Was this for the Celestron 9.25 Tube assembly by it self? Or the complete > Celestron 9.25 Ultima this is with fork mount. Same thing goes for the GPS XLT > scope. The best solution I've found over the JMI case was to have Cases and > covers make a soft case for the scope. Its still not Airline transportable but > will protect that valuable investment while going out into the desert or up into > the mountains. If you want something that can really take a beating you might > find a solution here at http://www.cases4less.com/ example Pelican large > case this should fit an entire Celestron C8 with fork mount for $143.00 > Clear Skies > Dwight L Bogan > > > -- > See message header for info on list archives or unsubscribing, and please > send personal replies to the author, not the list. > > -- See message header for info on list archives or unsubscribing, and please send personal replies to the author, not the list.