In message <954259e74e.boase@xxxxxxxxxxxxxxxxx> Bernard Boase <b.boase@xxxxxxxxxx> wrote: > Iyonix ROS 5.13 > Aemulor Pro 2.32 > Geminus 1.31 > ArtWorks 2.73 > > Re: the ArtWorks info bar: > > On moving colour blobs, they are logically moved but the bar is not > refreshed. The way the colour bar is redrawn after a colour drag is completely standard and it works fine on any platform I have tested it on. It never occurred to me to test it with Geminus. I have just tried it and I can confirm that it does not work with Geminus redraw acceleration switched on for ArtWorks. That is clearly a bug in Geminus and there is nothing ArtWorks can do about it. The solution is to either switch redraw acceleration off for ArtWorks or report the bug to Neil Spellings and hope for Geminus to be fixed. Instead of forcing the complete desktop to be redrawn using a WimpMode command in an Obey file, you can also press F12 Return. Within ArtWorks, you can choose the menu entry "Utilities => Show colour bar" twice. This closes and reopens the colour bar, which stops Geminus from believing that it has not changed. As for the colour patches in the Info Bar of the colour tool, you can press Shift-F11 twice to remove and redisplay the Info Bar. In any case, it would be best if Geminus was fixed. Martin -- --------------------------------------------------------------------- Martin Wuerthner MW Software lists@xxxxxxxxxxxxxxx --------------------------------------------------------------------- ------------------------------------------------------------ To change, suspend or cancel your subscription go to //www.freelists.org/list/artworks ------------------------------------------------------------