In message <LO2P265MB327980A2B363C21653F35765BD2B9@LO2P265MB3279.GBRP265.
PROD.OUTLOOK.COM>
Doug Webb <dougjwebb@xxxxxxxxxxx> wrote:
In message <eaa624b659.rcomp@xxxxxxxxxxxxxxxxxxx>
A Rawnsley <rcomp@xxxxxxxxxxx> wrote:
Hi folks,
I have just uploaded OS update 20 for iMX6 (formally known as "ARMX6")
machines to the usual download site for upgrades (see inside back cover of
your welcome guide). It is in the "Beta OS Updates" folder (for now).
Please note that mini.m users will need a similar-but-different version
which I'll roll out once this version has been sanity-checked.
I can confirm that I have installed this on my iMX6 systems here and
things seem to be running well. It has also been (successfully) tested on
several other machines in the field.
Hi Andrew,
Thanks for sorting out the update which is now running on my iMX6.
Just one word of caution for those of us who are running Pinboard2 beta's
in that the update tries to reinstall the old pinboard set up so best to
delete Pinboard Setup app from the update before doing the upgrade.
This can be found at:
!OSupgrade.New.RO500Hook.Res.Configure
And you delete the !PinSetup application and then run the upgrade.
Hope this helps.