On 24 Jun 2017 Bernard Boase <b.boase@xxxxxxx> wrote:
On 13 Jun, b.boase@xxxxxxx typed:
The three lines of version info had just been successfully cut/pasted
from above my sig to below. Yet a second Ctrl-V pasted in the
"Postage..." line from UniClip AND caused the mail to be sent without
my clicking Send.
Not good.
I absolutely need to get to the bottom of this clipboard problem.
Having never used UniClip until recently I had experienced no problems
with either UniControl's Print and Launch functions or with the RISC
OS clipboard.
Now if I use UniClip after a reboot, it seems impossible to prevent
it from disrupting the most basic RISC OS clipboard functions.
It appears that it uses files
!Scrap.ScrapDirs.ScrapDir.UniServer.ClipLocal
!Scrap.ScrapDirs.ScrapDir.UniServer.ClipRemote
Drop text onto the Clibpoard's Drop zone creates both files with the
same content: fine. Ctrl-C on the PC replaces the content of
ClipRemote. Ctrl-V on RISC OS then copies in ClipRemote even when
Disable has been ticked on UniClip's little dialogue. Surely it should
copy in ClipLocal in this situation?
In Choices:UniServer.UniChoices, has 'NoClip:on' . I can't find a
description of what that might be for.
What further details of my setup could help understand this? Is there
a fuller description of what the app is supposed to do, since its
little 'i' help panel is misleading about the Disable option?