Hi ! I get this message from targen, I suppose it has something whit the -c profile to do, is there something I can do about it ? Cheers Magnus E:\argyll_bat\Marutt_280gr_gl_fb_barux_fine_art>call targen -v -d4 -cP21_Mar_28 0_b_pre_20111017_v01.icm -g100 -a1.0 -f2340 prof_P21_280gr_barux_cmyk_A4_v01 CMYK test chart Compostie Grey steps = 100 Full spread patches = 2340 Ink limit = 341.5% (underlying 341.5%) Degree of adaptation: 1.000 Adaptation weights: Device = 0.350, Perceptual = 0.650, Curvature = 1.000 Perceptual cache resolution = 7 Acceleration grid res = 7 There are 100 unique fixed points to add (103 total fixed points) There are 2237 far spread points to add Added 2337/2337 After seeding points: MinPoint = 1.164, Min = 1.099, Avg. = 12.583, Max = 15.345 , 36.2 secs Re-seeding It 1: Maxmv = 0.168740, MinPoint = 1.164, Min = 1.099, Avg. = 12.736, Max = 16.4 52, 231.4 secs. Re-seeding It 2: Maxmv = 0.132740, MinPoint = 1.164, Min = 1.099, Avg. = 12.732, Max = 17.0 64, 248.7 secs. Re-seeding It 3: Maxmv = 0.099218, MinPoint = 1.164, Min = 1.099, Avg. = 12.672, Max = 17.1 50, 110.9 secs. Re-seeding targen: Error - Failed to re-seed the veronoi after 100 tries - too many node in sertion failures ? --