[argyllcms] Re: Problem with finding port number for i1Pro - MacOS Lion
- From: Phil Cruse <pcruse@xxxxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Sun, 26 Feb 2012 19:51:46 +0000
Hi Mark,
I had similar, but not the same, problems last year, with OSX 10.6.6, and had a
lot of help from Graeme (around Feb 8, 2011).
"i think I've fixed it now. Found info on X-Rite site, about Difficulty
connecting X-Rite hardware to third-party software and turning OFF i1Pro in
X-Rite Device Services Preference Pane.
http://www.xrite.com/product_overview.aspx?ID=1161&Action=support&SupportID=4980
Any way to override this, so you don't have to keep switching on/off?
Phil Cruse"
May not like having i1 running with Argyll and X-Rite software at the same time.
Good luck,
Phil
On 26 Feb 2012, at 19:12, Mark MacKenzie wrote:
> I am working through Phil Cruse's suggestions and all have worked to help me
> get started on MacOS with ArgyllCMS and my i1Pro.
>
> BUT, upon running the terminal command: chartread Chartname (appropriate
> name inserted for chartname) I get an error. The complete message from
> terminal is as follows:
>
> chartread Pro4000_MIS_OffDepot_PhotoMatte
> chartread: Error - icoms - usb_is_usb_portno: port number out of range!
>
> I am using the standard i1Pro and a recent iMac with the i1Pro directly into
> one of the USB ports on the back of the iMac.
>
> Any suggestions on either finding the correct port number of using one that
> works?
>
> Mark
>
Other related posts:
