[argyllcms] Re: HP Dreamcolor profiler locked and not recognized
- From: Jarkko Lavinen <jlavi@xxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 16 Aug 2010 16:27:56 +0300
On Tue, Aug 10, 2010 at 10:07:47PM +1000, Graeme Gill wrote:
> If you were to run some sort of USB trace on the software that does work
I couldn't get any log with Snooppro on the device at WinXP. I
have at work an access to Beagle 480 USB sniffer and tried with
that.
I launched the HP calibrator program which said Eye One was not
connected. I started recording and plugged the Eye One and waited
for HP softwere to detected it and stopped recording.
The log is available at http://piipiip.net/~jlavi/USB/calibraration.tdc
Too bad Data Center program does not allow sawing it as text file, but
the program is available available for Linux at
http://www.totalphase.com/download/zip/data-center-linux-v4.20.zip
The event index 270 is control transfer:
42 05 00 4C 5F 43 4B 00 or "B..LOCK"
Could this be the unlock string?
Jarko Lavinen
Other related posts:
