On November 17, 2014 11:09:14 AM Graeme Gill wrote: > Curtis Hildebrand wrote: > > Hi, > > > I'm having a problem loading an ICC profile that was made with argyllcms > > 1.6.3. It will not load with the 1.6.3 version of dispwin. However, it > > will load with 1.4.0 dispwin. I don't have other versions to test with. > > I found one other reported case of this error on the Internet, but their > > solution was to use an older version dispwin. Any suggestions? > > > > ]$ /opt/Argyll_V1.6.3/bin/dispwin -D9 -L current.icc > > > > using colord for profile installation > > > > Dispwin: Warning - Profile 'current.icc' provided as argument is being > > ignored! > > I'm not sure what you are attempting here. You should > either be loading the installed profile (-L) _or_ loading > a specific profile (current.icc). current.icc is a symlink to my newest ICC that I've created. Just a way for me to keep track. I had already used the Install (-I) option and it gave the same results. Thanks for the pointer to read up on -I and -L http://www.argyllcms.com/doc/dispprofloc.html http://www.argyllcms.com/doc/Scenarios.html#PM5 See update below > > > dispwin_get_profile called > > Failed to find device that matches f2a9e96b601d392cf13fcea813a27829: > > property match 'OutputEdidMd5'='f2a9e96b601d392cf13fcea813a27829' does > > not existGot ucmm error 11 'colord-not-found' > > Dispwin: Error - Failed to get the displays current ICC profile > > This seems to be a problem with colord or the colord shim, rather than > ArgyllCMS/dispwin. colord is returning error 11 > CD_EDID_ERROR_MONITOR_NOT_FOUND. > > (I don't know where the 'colord-not-found' message is coming from - it isn't > in the ArgyllCMS source - are you compiling from ArgyllCMS source or using > the provided binaries, or are you using a (possibly modified) Linux > distribution version ?) I'm using the download binaries on Mageia development version (Cauldron). colord-1.2.4 > > > ]$ /opt/Argyll_V1.4.0/bin/dispwin -D9 -L current.icc > > V1.4 doesn't support colord, but relies on a purely ArgyllCMS mechanims > (ucmm), which is why it is working for you. > > So you either need to disable colord on your system, or re-install the > profile in a way that colord is keeping track of it. > > ie. > > dispwin -I current.icc > > Graeme Gill. I'm not sure what it was, but here's the steps that I did and it now works. - renamed ~/.local/color.jcnf to a .bak and restarted the computer - dispwin -I "20141010 20WMGX2 D5500 2.2 20WMGX2 D5500 2.2-XYZCLut-matrix.icc" \--> same error as before - installed colord-kde - Used colord-kde to add the profile and select it as default - 1.6.3 dispwin -I "20141010 20WMGX2 D5500 2.2 20WMGX2 D5500 2.2-XYZCLut- matrix.icc" ==> no error - 1.6.3 dispwin -L ==> no error Curtis