I'm having a problem loading an ICC profile that was made with argyllcms 1.6.3. It will not load with the 1.6.3 version of dispwin. However, it will load with 1.4.0 dispwin. I don't have other versions to test with. I found one other reported case of this error on the Internet, but their solution was to use an older version dispwin. Any suggestions? Curtis ]$ /opt/Argyll_V1.6.3/bin/dispwin -D9 -L current.icc Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Unable to intern atom 'EDID_DATA' Got EDID for display using colord for profile installation new_dispwin: Opened display OK dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_get_ramdac returning OK Saved original VideoLUT new_dispwin: return sucessfully Dispwin: Warning - Profile 'current.icc' provided as argument is being ignored! dispwin_get_profile called Failed to find device that matches f2a9e96b601d392cf13fcea813a27829: property match 'OutputEdidMd5'='f2a9e96b601d392cf13fcea813a27829' does not existGot ucmm error 11 'colord-not-found' Dispwin: Error - Failed to get the displays current ICC profile ]$ /opt/Argyll_V1.4.0/bin/dispwin -D9 -L current.icc Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Unable to intern atom 'EDID_DATA' Got EDID for display new_dispwin: Opened display OK new_dispwin: return sucessfully dispwin_get_ramdac called Getting gamma using Randr 1.2 dispwin_get_ramdac returning OK Dispwin: Warning - Profile 'current.icc' provided as argument is being ignored! dispwin_get_profile called Loading current profile '/home/curtis/.config/color/icc/devices/display/current.icc' Setting X11 atom to current profile '/home/curtis/.config/color/icc/devices/display/current.icc' Setting _ICC_PROFILE property dispwin_set_ramdac called Setting gamma using Randr 1.2 XF86VidModeSetGammaRamp returning OK dispwin_del called About to close display Finished ]$ /opt/Argyll_V1.6.3/bin/dispwin -V current.icc Verify: 'current.icc' IS loaded (discrepancy 0.0%)