[argyllcms] Re: Aw: Re: Re: Re: Re: Chartread i1Pro2
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Mon, 29 Mar 2021 13:14:03 +1100
0815xl@xxxxxx wrote:
Hi,
At first I want to verify my printer profil, to see how strong is the drift
and when its time for a
new profiling.
right, so your workflow would be the same as profiling, perhaps
with a smaller number of patches in your drift test chart
Save the drift test chart .ti3 after initial profiling as your reference.
Do the same again immediately and use colverify between your
reference and the second example to establish the instance to instance
variability baseline.
Print the test chart again later latter stage and use colverify between the
reference
and latest .ti3 files to see how much they differ. If the errors are
significantly
greater than your baseline then you know how much your printer has drifted.
At second I want to get more safety when making a order to a ofsett printing
company. So that I
know better what the result will looks like. Colorspace for proofing would
then be Isocoated v2.
I'm not clear what you are working with in this case. Do you have a reference
chart printed by the offset printing company ?
Cheers,
Graeme Gill.
Other related posts: