[analogorgans] Re: Rodgers Specification 990
- From: "Bernie Arcand" <barcand@xxxxxxxxxx>
- To: <analogorgans@xxxxxxxxxxxxx>
- Date: Sat, 29 Dec 2007 18:03:34 -0600
Walt,
I'm not familiar with the 990, but it has to be something in common with the
entire system. If there are switches (pushbuttons) to select "Main" speakers
and "Antiphonal" speakers, make sure they are not dirty or broken. Check
them both.
Just a thought...perhaps not worth thinking.
Bernie in ND
----- Original Message -----
From: "Walt Scrivens" <walts@xxxxxxxx>
To: <analogorgans@xxxxxxxxxxxxx>
Sent: Saturday, December 29, 2007 3:24 PM
Subject: [analogorgans] Rodgers Specification 990
I have just inherited the chore of resurrecting a Rodgers Specification
990 organ at our church. It was working about six months ago, but when
they went to use it for Christmas, there was no sound at all.
I am an electronics geek (mostly computers but some TV and HI-FI
servicing from 30 years ago) and not an organist.
I'm looking for any kind of schematics or service manuals. There are a
few on eBay but not for this model.
The organ turns on, the lights on the console work, the presets seem OK,
and the amplifiers are all apparently operating, but no sound from
anything. I have yet to remove the back from the console.
Any help or advice would be most welcome!
Walt Scrivens
This list is provided by Frog Music Press at www.frogmusic.com.
This list is provided by Frog Music Press at www.frogmusic.com.
Other related posts:
