[amayausers.com] Re: z axis timed out
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 10 Jul 2010 17:27:19 UT
This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by
clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/976.html#000005
Edna,
There are many changes in the V9 software compared to the version 6 that you
had before. Some of these changes are obvious on the screen and others are
hidden in the background. And still there are changes that will affect the way
your machine responds.
If you don't have time to learn all the new changes and/or have a tech tune
your machine to run with the new software (if necessary), then simply install
Version 7 or prior and your machine should run as you knew it to, like before.
Good Luck,
Ed
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
