I agree on the screw conversion. My friend did hers and then did mine and I couldn't be happier. Aaron Sargent The Linen Barn linen@xxxxxxxxxxx 541-770-2957 Medford, OR ----- Original Message ----- From: "Douglas Parker" <jtbembsvcinc@xxxxxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Thursday, April 13, 2006 7:23 AM Subject: [amayausers] Re: loose hoop screws > Hi Susan, > > I have found over the last 3 years of running my Amaya that > routine hoop maintenance is as important as machine maintenance. > I check the mounting screws on my hoops (the ones that are mounted > with screws) once per month. More often on the hoops I used on a > regular basic. While it isn't often I find loose screws, it does > occur occasionally. > > Another note, if you haven't done so, it might be a good idea to > change the hoop tightening screw on the 14.25"X11.75" (36cmX30cm) > hoop from the little round brass thumb screw to the larger style > used on the 17.25"X11.75" (44cmX30cm) hoops. MelcoMart sells these > replacement adjusting screw and with a little mechanical ability > with a drill, the conversion can be accomplished in about 30 minutes. > I have 6 of the 14.25"X11.75" hoops and have converted all of them > to the larger screw. It makes them much easier to adjust before and > after hooping a garment. > > Regards, > Doug Parker > JTB Embroidery Services, Inc. > jtbembsvcinc@xxxxxxxxxxxxx > Denver, CO > > > On 4/11/06 20:57, "suried@xxxxxxxxx" <suried@xxxxxxxxx> wrote: > >> Hi Everyone, >> I was wondering if anyone has had any trouble with the >> screws on the 30cm x 36cm hoop coming loose?? I was >> stitching last night when my husband just happened to >> walk in and take a look at what I was stitching. He >> saw a screw on top of my garment bouncing around. >> Luckily it didn't get in the way of the needle and >> assembly!! I'm sure that could have caused a real >> mess!! We put the screw back in and after I finished >> stitching, I found another screw and just popped out >> also. Of course I tightened all the rest--which I >> should have done in the first place. All the other >> screws were loose too. >> >> Is this a common problem and is there anything I can >> do besides periodically check and tighten them?? >> >> Susan >> >> >> >> Susan Riedlinger >> Embroidery Station >> Columbus, OH >> >> __________________________________________________ >> Do You Yahoo!? >> Tired of spam? Yahoo! Mail has the best spam protection around >> http://mail.yahoo.com >> > > >