[amayausers.com] Re: frequent threadnesting .... why??
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 13 Jun 2011 05:04:18 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1194.html#000001
Hi Diane,
Raise up the pinch lever and make sure your thread is in the little "V" notch
toward the back in the cap of the thread feed roller (the little black cover
that goes over the roller). Then put your lever back down and you should be
good to go (after cleaning out all pieces of thread from your nesting). You
should not be able to pull thread through the pinch roller now.
Sharon
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
