Hey Ron, Melco tech gave me the same advice. One problem...the gorilla in the assembly plant did not expect a 105 lb. woman to attempt to remove them!! Too tight for me to get loose. I have to wait until later for help. Thanks for the quick response!! LuAnn ----- Original Message ----- From: Body Cover To: amayausers@xxxxxxxxxxxxx Sent: Wednesday, August 03, 2005 3:51 PM Subject: [amayausers] Re: fast frame question We just took off the two Allen head screws then when we were done reattached the piece and all is good. try it. Ron Vinyard Body Cover / Magic Stitches www.bodycoverdesign.com Grants Pass, Oregon 1-888-435-0716 ----- Original Message ----- From: image embriodery To: amayausers@xxxxxxxxxxxxx Sent: Wednesday, August 03, 2005 12:21 PM Subject: [amayausers] fast frame question I am attempting to put a desing on the back pocket of a pair of jeans. I have the jeans attached just fine, but when I trace the design the pocket is getting caught on the piece under the bobbin case that the cap driver attaches to. Is the embroidable area on a pocket that small? LuAnn @ Image Embroidery Because Your "Image" Matters