If you need the larger area-try a piece of masking tape over that bracket and see if that lets the pocket slide-otherwise, yup-you don't have much area to embroider! Have to go to a smaller frame if you have one that will work. Roland From: "image embriodery" <imageembroidery@xxxxxxxxxx> Reply-To: amayausers@xxxxxxxxxxxxx Date: Wed, 3 Aug 2005 15:21:14 -0400 To: <amayausers@xxxxxxxxxxxxx> Subject: [amayausers] fast frame question I am attempting to put a desing on the back pocket of a pair of jeans. I have the jeans attached just fine, but when I trace the design the pocket is getting caught on the piece under the bobbin case that the cap driver attaches to. Is the embroidable area on a pocket that small? LuAnn @ Image Embroidery Because Your "Image" Matters