[amayausers] Re: design pulling
- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 13 Mar 2006 12:22:15 -0700
Are you running auto actifeed or standard? Check your bobbin tension too.
Sharon
----- Original Message -----
From: "LiVawne G. Moore" <moore-embroidery@xxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Monday, March 13, 2006 11:58 AM
Subject: [amayausers] design pulling
> Hello all:
> I have a design that is running on all my Amayas and running well, except
> for one machine. It is pulling so bad that the material actually has a
> hole
> in the middle of the A. It is the same design, same machine settings and
> the bobbins seem to be adjusted the same also.
>
> Help!! Why is it doing this? I've adjusted and checked everything that I
> know of an nothing works. Right now the machine is idle it is so bad.
>
> Thanks in advance to any help and suggestions.
>
>
> Sincerely,
> LiVawne G Moore
>
> Moore Embroidery & Designs
> 1724 Jerusalem Drive
> Round Rock, TX 78664
> 512-989-0518 Office
> 512-632-7826 Cell
> Moore-Embroidery@xxxxxxxxxx
> www.Moore-Embroidery.com
>
>
>
>
Other related posts:
