Standard, I have also loosened and tightened the bobbin. I didn't try the auto-density which I will give it a try. Thanks for suggestions. LiVawne -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Rod or Sharon Sent: Monday, March 13, 2006 1:22 PM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: design pulling Are you running auto actifeed or standard? Check your bobbin tension too. Sharon ----- Original Message ----- From: "LiVawne G. Moore" <moore-embroidery@xxxxxxxxxx> To: <amayausers@xxxxxxxxxxxxx> Sent: Monday, March 13, 2006 11:58 AM Subject: [amayausers] design pulling > Hello all: > I have a design that is running on all my Amayas and running well, except > for one machine. It is pulling so bad that the material actually has a > hole > in the middle of the A. It is the same design, same machine settings and > the bobbins seem to be adjusted the same also. > > Help!! Why is it doing this? I've adjusted and checked everything that I > know of an nothing works. Right now the machine is idle it is so bad. > > Thanks in advance to any help and suggestions. > > > Sincerely, > LiVawne G Moore > > Moore Embroidery & Designs > 1724 Jerusalem Drive > Round Rock, TX 78664 > 512-989-0518 Office > 512-632-7826 Cell > Moore-Embroidery@xxxxxxxxxx > www.Moore-Embroidery.com > > > >