[amayausers.com] Re: X stepper
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 7 Nov 2008 22:45:42 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/ultimatebb.php?/topic/1/548.html#000001
Dennis,
It was probably a "Cutter stepper Index Error". This would indicate that the
Stepper motors for the knife/selector were not at their respective home
positions.
Next time , if it happens again, do an "intermediate trim", using the
Hammer(Adjustment key) and needles key together. Make sure you do get a trim,
if not , trim it manually, then click on "Maintenance", "Steppers" and click on
"Detect Trimmer". Click OK. Now hit your "Jog Forward" key on the machine
keypad once. It will probably make the color change at this time, if one was
called for. Now hit the "Jog Forward" key a couple of more times and hit
start......takes more time to write it then do it....
Glad to hear your thread break issues have gone away---shows that you were
listening during the training....and now applying all that info you
received..... ;-))
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
