[amayausers] Re: Wish I could get the acti-feed to work
- From: Mike Garber <agraphic2@xxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Thu, 16 Nov 2006 16:02:17 -0700
I know it works because other people love it. Its been me before, and
is probably me again :'( (just found the faces on my e-mail menu).
John Yaglenski wrote:
>The absoute latest :) Let me say, it works ok - I just think there are
>times where I think it would work better if I could set a mimimum thickness
>to NOT go below. For example, last night on the polos, it was tight enough
>to be a patch - then turning auto off and letting up on the MT allowed the
>thread to sit more on top of the fabric than into it...
>
>John
>
>-----Original Message-----
>From: amayausers-bounce@xxxxxxxxxxxxx
>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Russell Silva
>Sent: Thursday, November 16, 2006 5:00 PM
>To: amayausers@xxxxxxxxxxxxx
>Subject: [amayausers] Re: Wish I could get the acti-feed to work
>
>John,
>
> What version of AOS are you running, I seem to have better luck with
>auto actifeed with 7.00.045 then I did with version 6.08.052 on my non XT
>machines. Maybe you need to uninstall and reinstall the AOS to get it to
>work properly.
>
>Russell Silva
>R. S. Embroidery
>Amaya Technician & Trainer
>Attleboro, Ma
>508-222-4433
>
>----- Original Message -----
>From: "John Yaglenski" <john@xxxxxxxxxxxxx>
>To: <amayausers@xxxxxxxxxxxxx>
>Sent: Thursday, November 16, 2006 4:43 PM
>Subject: [amayausers] Re: Wish I could get the acti-feed to work
>
>
>
>
>>I have to be honest on this - I really havn't had a ton of luck with
>>ActiFeed on my normal Amaya or as I like to call it PRE-XT. I know we are
>>talking XT in the case below but I wanted to get a feel for how things
>>were
>>going for everyone else.
>>
>>I even did the thread break sensor upgrade where the whole thread break
>>sensor is replaced - and yet still, MT runs at 1-2 on many items. Just
>>did
>>a couple pique polos last night with two pieces of 1.5 oz backing - and
>>still it ran at 1-2 MT sometimes bobbing up to 3. I almost wish you
>>could
>>run Auto but set a minimum or base that it wouldn't go below. I have
>>tried
>>Auto with a tighter bobbin and a looser bobbin and I see no difference no
>>matter what I do. Oh, and I did the thread feed roller upgrade kit etc.
>>
>>Anyone have any thougts on the subject?
>>
>>John
>>
>>-----Original Message-----
>>From: amayausers-bounce@xxxxxxxxxxxxx
>>[mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Linen Barn
>>Sent: Thursday, November 16, 2006 4:25 PM
>>To: amayausers@xxxxxxxxxxxxx
>>Subject: [amayausers] Re: Wish I could get the acti-feed to work
>>
>>Mike,
>>
>>Try running in regular mode for a color change or so and then switch back.
>>Sometimes this resets the settings. You can try to restart the computer
>>as
>>well.
>>
>>Aaron Sargent
>>The Linen Barn
>>linen@xxxxxxxxxxx
>>541-770-2957
>>Medford, OR
>>----- Original Message -----
>>From: "Mike Garber" <agraphic2@xxxxxxxxxxxx>
>>To: "amayausers list" <amayausers@xxxxxxxxxxxxx>
>>Sent: Thursday, November 16, 2006 11:14 AM
>>Subject: [amayausers] Wish I could get the acti-feed to work
>>
>>
>>
>>
>>>Has anyone else had trouble getting the acti-feed to work. I've got
>>>both XT and the old red Amaya's. The MT hangs out at 2 or 3 and then
>>>thread break. I've tried tightening up the bobbin but still no change
>>>in the MT. I'm sewing hats with massive seams and about to put color
>>>changes in to deal with it.
>>>
>>>Thanks in advance...
>>>
>>>Mike
>>>
>>>
>>>===========================================================
>>>
>>>The AmayaUsers Mailing List
>>>Website: http://www.amayausers.com
>>>Discussion Board: http://www.amayausers.com/boards
>>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>>
>>>===========================================================
>>>
>>>
>>===========================================================
>>
>>The AmayaUsers Mailing List
>>Website: http://www.amayausers.com
>>Discussion Board: http://www.amayausers.com/boards
>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>>===========================================================
>>
>>===========================================================
>>
>>The AmayaUsers Mailing List
>>Website: http://www.amayausers.com
>>Discussion Board: http://www.amayausers.com/boards
>>Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>>===========================================================
>>
>>
>>
>
>
>===========================================================
>
>The AmayaUsers Mailing List
>Website: http://www.amayausers.com
>Discussion Board: http://www.amayausers.com/boards
>Subscribe/Unsubscribe: http://www.amayausers.com/list
>
>===========================================================
>
>===========================================================
>
>The AmayaUsers Mailing List
>Website: http://www.amayausers.com
>Discussion Board: http://www.amayausers.com/boards
>Subscribe/Unsubscribe: http://www.amayausers.com/list
>
>===========================================================
>
>
>
>
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
