[amayausers.com] Re: Week of disasters, now XT is down

  • From: theboards@xxxxxxxxxxxxxx
  • To: amayausers@xxxxxxxxxxxxx
  • Date: Mon, 1 Mar 2010 14:02:12 UT

This message was posted by The Embroidery Authority on AmayaUsers.com. PLEASE 
DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by 
clicking here: 
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/884.html#000004

Maureen,
If in fact, your machine's needlecase is between two needles, you will not be 
able to rotate the Z shaft.

Of course, if it just looks like it's between two needles, say, the presserfoot 
is bent significantly, then maybe you'll be able to rotate the Z shaft.

Good Luck,
Ed

Ed

=========================================================== 

The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list

===========================================================

Other related posts:

  1. Home
  2. amayausers
  3. Archive
  4. 03-2010