[amayausers.com] Re: Thread Sling Shots Out Of Needle After Trim
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 5 Jun 2010 17:32:05 UT
This message was posted by Vegas Embroidery on AmayaUsers.com. PLEASE DO NOT
REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking
here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/960.html#000003
GCannon,
I did all the suggestions except the on about "trimmer designated (checked) for
your machine."
I'm not sure how or what I'm looking for on that. Can you explain this a little
more?
Rod,
The knife is about 2 months old and I've done all the lubrication for that.
I've also adjusted the cable for the grabber as it was off slightly. I ran the
Amaya trim test with Melco Tech support and no problems at all.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
