[amayausers.com] Re: Thread Sling Shots Out Of Needle After Trim
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sat, 5 Jun 2010 17:18:43 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/960.html#000002
Ben,
Sling shotting is usually caused by something going wrong in the
trimmer/selector system.
The knife may be dull.
The knife/selecter area may need to be cleaned thourougly and lubricated.
The push/pull cables/push rods may be bent causing the knife and/or selector to
not travel their full stroke
It may be caused by hook timing issues or a combination of the above.
I assume we are talking about an XT Amaya?
Have you run the test design called Amtrim? This Melco test design is primarily
used to check the trimmer for proper operation.
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
