[amayausers.com] Re: Thread Sensor Assembly - One Works Well, One Not So ...
- From: HTorbidoni@xxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 16 May 2008 20:43:20 EDT
John,
You can also check the gap in your feeder gears as well as the gap on the
take up lever gears.
Another thing that comes to mind is the x cable tension, X-carriage bearing
load, y rail belt tension and y motor belt tension.
You can always swap the sensors on the machine and see whether they react
differently
Do all this while you are hopping and skipping and running in place!
Hugo
**************
Wondering what's for Dinner Tonight? Get new twists on
family favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
Other related posts:
- » [amayausers.com] Re: Thread Sensor Assembly - One Works Well, One Not So ...
