[amayausers.com] Re: Thread Feed Roller change out...
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Mon, 28 Nov 2011 01:11:35 UT
This message was posted by Merlin1964 on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1262.html#000002
Yes I check to make sure all covers are interlocked and seated fully.
Figured out the right way to do it, start from the left not the right. they
interlock easier that way.
Megnetic cover, cool, it should be easy to do then, just waiting for the repair
kit to show up from UPS. Hopefully Monday..... Thanks for the info.
I will go and recheck the black covers.
Thanks again
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
