This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/11/62.html#000005 Off the top of my head about $47 for the 6' 'drape' 4 sided cover, which WILL also fit 8' tables with no problem. 8' cover won't fit 6'...hangs too low. Going rate through Ad Specialty Suppliers (retail) is anywhere from $125 to $250 for ONE tablecover, PLUS setup charges of $80-$200 per color! I don't charge any setup, and average heat seal image is 8" x 42" give or take. I do one color or digital print multi color and do quite a few a year. Trick is setting up a big enough jig to line up your logos to get them in the right place. Screw it up-and you just threw out the cover-you cannot peel it off and redo it. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================