[amayausers] Re: Running slow
- From: Mike Wargo <info@xxxxxxxxxxxxxxxxxxx>
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 07 Oct 2005 18:42:59 -0400
> Dean, check the 5 volt supply on that machine, I believe that one is
> adjustable, if the voltage drops down below 5 you will have all kinds of
> strange problems. That can be checked on the AXIS PCP located on the left,
> connect to pin 4 (-) and 3 (+) the pot to adjust is next to the power supply
> connector and a red LED. You need to adjust it for 5.05. Make sure that power
> supply is not covered with dust.
Regards
Mike Wargo
Other related posts:
