[amayausers] Re: Roller lubrication
- From: "Linen Barn" <linen@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 23 May 2006 16:46:56 -0700
Use Polymer cause its not Metal touching metal. Only use the Multi Purpose
if you have metal on metal.
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, May 23, 2006 4:25 PM
Subject: [amayausers] Re: Roller lubrication
>
> Thought the yellow xt rollers have both metal in the middle and plastic
> outside? Which do you use
>
> Anand
>
>
> The way to remember which grease to use where is Multi Purpose is "M" for
> metal and Polymer is "P" for plastic.
> Sharon
> Embroidery Cottage
> Rod & Sharon Springer
> Melco Amaya Tech & Trainers
> Design Shop Pro+ Digitizing
> Boise, ID 83713
> 208-938-3038
> ===========================================================
>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
