[amayausers] Re: Roller lubrication
- From: "Linen Barn" <linen@xxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Wed, 24 May 2006 12:04:26 -0700
I will take you off. You can always go to www.amayausers.com and check out
the discussion board there or you can view the archives for this list at
www.freelists.org/archives/amayausers anytime you would like :)
Aaron Sargent
The Linen Barn
linen@xxxxxxxxxxx
541-770-2957
Medford, OR
----- Original Message -----
From: "Ram Printing and Promotions Inc" <ramprinting@xxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Wednesday, May 24, 2006 11:44 AM
Subject: [amayausers] Re: Roller lubrication
> Aaron,
>
> how do I get removed from the list. I enjoy the feedback and the tips but
> my email box can't keep up. I get on average 150-200 emails per day for
> work related quotes, orders etc. along with the 20-40 or more on average
> AmayaUsers and it's a nightmare. My staff doesn't know what to delete and
> what to save and my poor 200meg email box is timed out before the day is
> through. Most of the AmayaUser posts don't even get read here and just
> deleted at the end of the day for space.
>
> please advise
>
> Dana @
> Ram Printing & Promotions Inc.
> & Threadworks Custom Embroidery
> (780) 875-5073
> www.ramprinting.net
>
> ----- Original Message -----
> From: Linen Barn <linen@xxxxxxxxxxx>
> Date: Tuesday, May 23, 2006 5:46 pm
> Subject: [amayausers] Re: Roller lubrication
>
>> Use Polymer cause its not Metal touching metal. Only use the Multi
>> Purpose
>> if you have metal on metal.
>>
>>
>> Aaron Sargent
>> The Linen Barn
>> linen@xxxxxxxxxxx
>> 541-770-2957
>> Medford, OR
>> ----- Original Message -----
>
>> From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
>> To: <amayausers@xxxxxxxxxxxxx>
>> Sent: Tuesday, May 23, 2006 4:25 PM
>> Subject: [amayausers] Re: Roller lubrication
>>
>>
>> >
>> > Thought the yellow xt rollers have both metal in the middle and
>> plastic> outside? Which do you use
>> >
>> > Anand
>> >
>> >
>> > The way to remember which grease to use where is Multi Purpose is
>> "M" for
>> > metal and Polymer is "P" for plastic.
>> > Sharon
>> > Embroidery Cottage
>> > Rod & Sharon Springer
>> > Melco Amaya Tech & Trainers
>> > Design Shop Pro+ Digitizing
>> > Boise, ID 83713
>> > 208-938-3038
>> > ===========================================================
>> >
>> > ===========================================================
>> >
>> > The AmayaUsers Mailing List
>> > Website: http://www.amayausers.com
>> > Discussion Board: http://www.amayausers.com/boards
>> > Subscribe/Unsubscribe: http://www.amayausers.com/list
>> >
>> > ===========================================================
>> =============
> ==============================================
>>
>> The AmayaUsers Mailing List
>> Website: http://www.amayausers.com
>> Discussion Board: http://www.amayausers.com/boards
>> Subscribe/Unsubscribe: http://www.amayausers.com/list
>>
>> ===========================================================
>>
> ===========================================================
>
> The AmayaUsers Mailing List
> Website: http://www.amayausers.com
> Discussion Board: http://www.amayausers.com/boards
> Subscribe/Unsubscribe: http://www.amayausers.com/list
>
> ===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
