Only because I've been there, done that.....have you checked the emergency knob on the keypad? Dorothy In a message dated 8/20/2007 9:48:07 A.M. Pacific Daylight Time, captaingold@xxxxxxxxxxxxx writes: A couple of days ago, I powered up my machine and ran designs with no problem. I went out for part of the day, and when I came back I noticed the Amaya light wasn't on. My computer was still up and showed no signs of power outage. I didn't test anything at that time, just made sure everything was shut off. The next morning I went through my normal startup routine, but no power to the Amaya. I checked the exterior power supply and it's fine. The next step as I understand it is to check/change the fuses. I've got the fuses open, but can't seem to get them out of the machine. Is there some trick to this? Thanks, Connie Connie Bechtel Wyvern Productions http://www.wyvernproductions.com/ ************************************** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================