Have you verified you have power at the outlet on the wall? Ed -------------- Original message from DLCompton@xxxxxxx: -------------- > > Only because I've been there, done that.....have you checked the emergency > knob on the keypad? > > Dorothy > > > > In a message dated 8/20/2007 9:48:07 A.M. Pacific Daylight Time, > captaingold@xxxxxxxxxxxxx writes: > A couple of days ago, I powered up my machine and ran designs with no > problem. I went out for part of the day, and when I came back I > noticed the Amaya light wasn't on. My computer was still up and > showed no signs of power outage. > > I didn't test anything at that time, just made sure everything was > shut off. The next morning I went through my normal startup routine, > but no power to the Amaya. I checked the exterior power supply and it's fine. > > The next step as I understand it is to check/change the fuses. I've > got the fuses open, but can't seem to get them out of the machine. Is > there some trick to this? > > Thanks, > Connie > > > Connie Bechtel > Wyvern Productions > http://www.wyvernproductions.com/ > > > > > > > > ************************************** Get a sneak peek of the all-new AOL at > http://discover.aol.com/memed/aolcom30tour > > > =========================================================== > > The AmayaUsers Mailing List > Website: http://www.amayausers.com > Discussion Board: http://www.amayausers.com/boards > Subscribe/Unsubscribe: http://www.amayausers.com/list > > =========================================================== =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================