This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/589.html#000002 Or, if you don't mind longer sewing time per shirt, go into DS and find the offending stitches in the stitch tree and add a 'cut' between them. This will slow you down considerable during sewing but will make for much cleaner letters-you won't have the 'connector' between them. You could also consider deleting the 'digitized' lettering in DS and replace it with your own lettering-I have done this to be able to 'change' lettering when needed since 'predigitized' lettering comes through as 'artwork' not lettering. You can then control stitch density, pullcomp, spacing, etc. in a few minutes and really clean it up. If the logo sews fine, leave it alone. =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================