Hello,
Mama Kass has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of skipping stitches on only one needle.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6061-skipping-stitches-on-only-one-needle
Here is the message that has just been posted:
***************
OK, here's what I've found:
-needle scarf to back and all the way inserted (although I wouldn't have put
this newbie mistake past me right now)
-washed and re-greased thread feed and pinch rollers and then switched those
from needle 7 with those from needle 12, which sewed out fine and happens to be
my closest needle
-I do have what I would call skid marks on my rollers but no grooves like they
show in the photos; besides the rollers worked fine on another needle.
I sewed out the same design on both needles - 12 fine, 7 not so much.
Ipso facto...it's probably my hook timing, which was in the back of my mind but
something I didn't want to face because I hate doing it. I don't know my
farthest needle since this isn't listed on the machine and I've never had
reason to figure it out, but I have a sneaking suspicion it's needle 7!
So thanks for all your help; I'll let you know if the hook timing solves it.
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================