Hello,
Tricia has just posted in the Machines & Hardware forum of AmayaUsers
Discussion Boards under the title of machine not detecting thread break,
continues to sew.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6390-machine-not-detecting-thread-break-continues-to-sew
Here is the message that has just been posted:
***************
Couple things going on with this job. The thread keeps coming out of needle,
even up through the needle bar etc. Only the one color in this logo is giving
me problems-I've switched the needle, switched the thread to another needle,
even ran a different job with no problems (I figured if it was trim/knife
related, it would show up while running the other job)---Leading me to believe
possibly the digitizing?? Regardless, the machine is not stopping when the
thread comes out, it sews 1 or 2 more letters before it detects no thread.
I've checked that the Enable Thread Detection box is checked, yep, always is.
I really sick of re-threading the needle, almost once per shirt.
Any insights are much appreciated as always.
I've read older posts but didn't find a similar problem.
Thanks,
Tricia
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
