Hello,
Crown Trophy Cary has just posted in the Embroidery / How Do I? forum of
AmayaUsers Discussion Boards under the title of Thread Breaks and False Bobbin
Breaks on Knit.
This thread is located at
http://www.amayausers.com/discussion/showthread.php?6121-Thread-Breaks-and-False-Bobbin-Breaks-on-Knit
Here is the message that has just been posted:
***************
Hi All,
We are new embroiders. We have an XTS.
The issue we are having is with Block 2 Font.
Yesterday I was working on a Thin Polo with small text on both sides of the
chest. I got the Left side to stitch fine. Went to test what needs to go on the
right side on some thin knit scrap and we can't get it to sew out.
We keep getting fraying and snapped thread and False Bobbin Breaks.
Again this is mostly on Block 2 ran a test with some other fonts no luck.
.320 Height.
No underlay.
Short Stitches off.
Auto-Density.
Pull Comp 115.
Minimum Column Width 12.
Acti-feed is at 4
I have played with these settings nothing seems to help.
Needle has been checked for Damage also checked the angle.
Bobbin tension is good.
I am using a Lightweight Cut away backing have played with trying a single and
double layer.
The Presser foot is at a good height. I have checked that a few times along the
way.
Here is the kicker.... It sews out fine on broadcloth.
Am I messing some settings for knits?
Any help is greatly appreciated.
Thanks
Sophia
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
