Hello,
John has just posted in the Embroidery / How Do I? forum of AmayaUsers
Discussion Boards under the title of Hoop Tech vs. Melco Setup.
This thread is located at
http://www.amayausers.com/discussion/showthread.php/6890-Hoop-Tech-vs-Melco-Setup
Here is the message that has just been posted:
***************
---Quote (Originally by Luckynhguy)---
Hi John - I called Melco today and you are absolutely right. At least the guy I
spoke with thinks 60%. New Melco cap hoops are compatible with older model
drivers. He did say he was sure that the new red cap driver was NOT compatible
with older machines, such as my Big Red.
He also said he was pretty sure the Hoop Tech hoops would also work with the
old driver that I have.
Sent from my iPhone using Tapatalk
---End Quote---
Yep. Ill go further and say 99% chance they work. Half of our hoops are
HoopTech. You should be good to go.
Melco is trying to shy away from commenting on new products working on old
machines. They really want you to upgrade. Problem is, they built the Amayas to
last. Despite a few issues here and there - our original reds are going strong.
And many of parts were/are pretty interchangeable with XT/XTS machines.
***************
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================