[amayausers.com] Re: Name patch for work shirts
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 19 Mar 2010 12:48:47 UT
This message was posted by signman on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1208.html#000004
Embroidering patches...create an 'inline' just a running stitch, 40 lenght-and
an outline (60 lenght) the diameter of the patch. Hoop up tear away in a large
enough hoop to do a half dozen or whatever, start with your image all the way
to the top left. Sew the outline, stop, position the patch and hold it down
with masking tape. Sew the 'inline' to hold it down, remove masking tape and
sew your name, image, whatever. When done, move image over, and start the next
one. Leave them all in place until done and then just tear them away.
Forget about iron on (PVC) backings on blank patches-the sewing is going to
cover it. And also-your WORK garments same as Boy Scout Uniforms-are treated to
REPEL dirt, adhesives, etc.-so iron on patches WILL NOT STICK. you can iron
them on only long enough to sew them on by hand or machine. The iron-on will
just pull right off easily so don't bother pay extra for it.
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
