[amayausers] Re: Machine Part Names
- From: "Rod or Sharon" <springer37@xxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Tue, 10 Jan 2006 15:54:56 -0700
At home I refer to it as the needle guard---it keeps my fingers away from
the needles!
Sharon
----- Original Message -----
From: "r.rinehartsr" <drader@xxxxxxxxxxxxx>
To: <amayausers@xxxxxxxxxxxxx>
Sent: Tuesday, January 10, 2006 3:39 PM
Subject: [amayausers] Re: Machine Part Names
> RIGHT-ON, ED!!! Debbie
> ----- Original Message -----
> From: "Ed Orantes" <e3m@xxxxxxx>
> To: <amayausers@xxxxxxxxxxxxx>
> Sent: Tuesday, January 10, 2006 10:39 AM
> Subject: [amayausers] Machine Part Names
>
>
>> Oh, that's referred to as "toggling the grabber" and the bar is the
>> "grabber
>> blade" which is kind of ironic because although it looks like it cuts
the
>> thread, it doesn't. If you ask me, I say it should be called the
thread
>> "tail pusher". And why not make the Grabber Blade out of something
like
>> clear plexiglass so that you can see through it when doing a trace.
>>
>> Just my thoughts.
>>
>> Ed
>>
>> -----Original Message-----
>> From: amayausers-bounce@xxxxxxxxxxxxx
>> [mailto:amayausers-bounce@xxxxxxxxxxxxx]On Behalf Of Roland R. Irish
III
>> Sent: Tuesday, January 10, 2006 7:23 AM
>> To: amayausers@xxxxxxxxxxxxx
>> Subject: [amayausers] Re: changing color needle
>>
>>
>> When I said to move 'the bar' I was referring to making a 'trim' to
stop
>> the
>> stitching by pushing the 'sickle' and 'bullseye' button for lack of
more
>> technical terms. Then you can move the needle, change colors, etc. or
>> start
>> over from there if you have to.
>> Roland
>>
>>
>>
>>
>
>
- References:
- [amayausers] Machine Part Names
- From: Ed Orantes
- [amayausers] Re: Machine Part Names
- From: r.rinehartsr
- [amayausers] Machine Part Names
