This message was posted by edr on AmayaUsers.com. PLEASE DO NOT REPLY VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here: http://www.amayausers.com/boards/ultimatebb.php?/topic/1/729.html#000002 Hi Signman, Good idea and I could drill a larger diameter hole in each spool, but it probably wouldn't be practical as I have around 80 colors of this small thread spool, each holding a mere 109 yards of thread. And when the spool runs out, I'd be back at the drill press. I have a few of these https://madeirausa.com/index.cfm?fuseaction=catalog.product&Product_ID=109&ProductGroup_ID=34&x=5347568&CFID=106130643&CFTOKEN=66747622 that fits snuggly over the thread posts. If I could just find a hollow tube that tapers down to a diameter that would fit the small spools that I could attach to these Madeira cone/spool holders, that would be great. Next time I go to Home Depot, I'll see if there is such a thing. Thanks! Ed =========================================================== The AmayaUsers Mailing List Website: http://www.amayausers.com Discussion Board: http://www.amayausers.com/boards Subscribe/Unsubscribe: http://www.amayausers.com/list ===========================================================
