[amayausers] Re: Heat transfers HELP!
- From: "Kesavan" <kesavan@xxxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Mon, 29 May 2006 14:42:57 +1000
You don't put both the layers on the machine. Open the shirt up and stretch
the back only over the machine. After you have pressed the transfer if the
ink has leaked through to the bottom plate wipe it off.
Anand
>
> Hello all,
> I know that there will not be too many around this weekend, but for
> those that are, I need some help with a problem I ran into applying a
> heat transfer to gold 50/50 t-shirts.
> Yesterday I applied transfers to white, sand, ash, royal, light blue and
> gold tees.
> All was fine until I took a closer look at the gold tees.
> The image that was heat pressed on the back appeared on the front of the
> tee! It's hard to explain. I even brought one of the tees home to see if
> washing it would bring the color back to those areas. It did not.
> Has anyone ever experienced anything like this and what should I have
> differently to prevent this from happening?
> Thank you in advance for your time and I hope everyone has a great
> holiday weekend!
> LuAnn @ Image Embroidery
===========================================================
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
