[amayausers.com] Re: Fuwari
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Sun, 21 Mar 2010 04:52:56 UT
This message was posted by Greenwing on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/2/1211.html#000003
You must adjust the pressor for height and material tthickness and lower thread
feed, have never reduced the speed.
But I have found it does not wash well looked sloppy after the first washing
and could not get the even look it was after stitching.
I even washed the sample done at a seminar by the trainer it washed poorly also.
It is just too sparce needs more body. and the materials are very costly. And I
am a floriani dealer and I am buying a cost..
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
