[amayausers] Re: Error Message - X motor tracking error
- From: "r.rinehartsr" <drader@xxxxxxxxxxxxx>
- To: <amayausers@xxxxxxxxxxxxx>
- Date: Thu, 29 Dec 2005 20:07:38 -0500
Tom, That happened to me with a jacket and the cause was the hood was hitting
something behind the hoop. It quit saying that and stitched out fine, after I
totally reversed the direction of the design (by flipping the capital F on the
the right side of the screen) and hooped the jacket backwards, so the hood hung
off the front of the machine. HTH Debbie
----- Original Message -----
From: Tom McCloud
To: amayausers@xxxxxxxxxxxxx
Sent: Thursday, December 29, 2005 5:30 PM
Subject: [amayausers] Re: Error Message - X motor tracking error
To All,
I'm attempting to do a full back jacket with a 14X11 rectangular
hoop.
The design is well within the dotted outline, but I did a trace
anyway.
I keep getting the following error:
X motor tracking error
Any and all help will be greatly appreciated. Thanks in advance.
Tom
Other related posts:
